Cobra Electronics PR260 WXC owner manual Using Your Radio, Speaker/Microphone/Charge Jack

Page 7

Using Your Radio

Operation

Speaker/Microphone/Charge Jack

•

Speaker/Microphone

To attach a speaker/microphone:

/Charge Jack

1. Open the speaker/microphone/charge

 

tab on top of your microTALK® radio.

2. Insert the plug into the speaker/ microphone/charge jack.

To connect a wall charger/adapter:

1.Open the speaker/microphone/charge tab on top of your microTALK® radio.

2.Insert the wall charger/adapter plug

into the speaker/microphone/charge jack.

Quick Start

1. Press and hold the Mode/Power button to turn on your radio.

2.Press the Channel Up or Channel Down button to select a channel.

Both radios must be tuned to the same channel to communicate.

3.Press and hold the Talk button while speaking into the microphone.

4.When finished talking, release the Talk button and listen for a response.

2

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PR260 WXC Customer Assistance Operators Making Life Easier and SaferFor Assistance in Canada or the U.S.A Automated Help DeskProduct Features Belt Clip FeaturesLimited One-Year Warranty on Radios & Charger WarrantyCheck to see that the batteries have been inserted properly Replace battery compartment cover and belt clipCaring for Your microTALK Radio Radio Charger Jack To charge batteries in radioTo attach a speaker/microphone Using Your RadioSpeaker/Microphone/Charge Jack To connect a wall charger/adapterCommunicating with Another Person Auto Battery SaveCall Button To Adjust Volume Press the Volume Up or VolumeTo Select a Channel Listening for a ResponseLock Function Light/Max Range To temporarily turn off auto squelchTo turn maximum range extender on To turn maximum range extender offSet Privacy Code Scrolling Through the Mode FunctionMicroTALK Range Your range will vary depending on terrain and conditionsTo select a privacy code Ctcss Privacy CodesTo listen to all hazards radio channels Mode FunctionsTo turn VOX mode on or off NOAA* All Hazards Radio ChannelsChannel Scan To Set VOX SensitivityTo scan channels This will return the radio to Standby mode To scan privacy codes Privacy Code ScanIf you press the Talk button while scanning and not within Press the Mode/Power button to proceed to other functionsRoger Beep Confirmation Tone Five Call Tone SettingsTo change a call tone setting On or off setting is displayedGeneral Specifications General Specifications and LicensingLicensing Safety Information for microTALK Radios Safety and Trademark AcknowledgementNormal Position Product Service
Top Page Image Contents