Cobra Electronics PR260 WXC owner manual This will return the radio to Standby mode

Page 15

Mode Functions

Operation

During scanning (while receiving an incoming transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on that channel. Your radio will remain on that channel and return to Standby mode.

b. Press the Channel Up or Channel Down button to resume scanning channels.

If you press the Talk button while scanning and not within 10 seconds of receiving a transmission, you will transmit on the channel on which you last received a transmission. This will return the radio to Standby mode.

If you do not press any button within 10 seconds,

your radio will automatically resume scanning channels.

During scanning (while not receiving a transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on the channel or channel/privacy code that was displayed before you entered mode functions or the channel on which, during scanning, you last received a transmission.

This will return the radio to Standby mode.

b. Press the Mode/Power button to proceed to set privacy code scan on the channel that was either displayed before you entered mode functions or on which, during channel scanning, you last received a transmission (see page 11 for further details).

c. Press the Lock button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the channel on which, during scanning, you last transmitted or received.

10

Page 14 Page 16
Image 15
Page 14 Page 16
Contents PR260 WXC Customer Assistance Operators Making Life Easier and SaferFor Assistance in Canada or the U.S.A Automated Help DeskProduct Features Belt Clip FeaturesLimited One-Year Warranty on Radios & Charger WarrantyCheck to see that the batteries have been inserted properly Replace battery compartment cover and belt clipCaring for Your microTALK Radio Radio Charger Jack To charge batteries in radioTo attach a speaker/microphone Using Your RadioSpeaker/Microphone/Charge Jack To connect a wall charger/adapterCommunicating with Another Person Auto Battery SaveCall Button To Adjust Volume Press the Volume Up or VolumeTo Select a Channel Listening for a ResponseLock Function Light/Max Range To temporarily turn off auto squelchTo turn maximum range extender on To turn maximum range extender offSet Privacy Code Scrolling Through the Mode FunctionMicroTALK Range Your range will vary depending on terrain and conditionsTo select a privacy code Ctcss Privacy CodesTo listen to all hazards radio channels Mode FunctionsTo turn VOX mode on or off NOAA* All Hazards Radio ChannelsTo Set VOX Sensitivity Channel ScanTo scan channels This will return the radio to Standby mode To scan privacy codes Privacy Code ScanIf you press the Talk button while scanning and not within Press the Mode/Power button to proceed to other functionsRoger Beep Confirmation Tone Five Call Tone SettingsTo change a call tone setting On or off setting is displayedGeneral Specifications General Specifications and LicensingLicensing Safety and Trademark Acknowledgement Safety Information for microTALK RadiosNormal Position Product Service
Top Page Image Contents