Cobra Electronics PR260 WXC If you press the Talk button while scanning and not within

Page 17

Mode Functions

Operation

During scanning (while receiving an incoming transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on that channel/privacy code. Your radio will remain on that channel/privacy code and return to Standby mode.

b. Press the Channel Up or Channel Down button to resume scanning privacy codes.

If you press the Talk button while scanning and not within

10 seconds of receiving a transmission, you will transmit on the channel/privacy code on which you last received a transmission. This will return the radio to Standby mode.

If you do not press any button within 10 seconds, your radio will automatically resume scanning privacy codes.

During scanning (while not receiving a transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on the channel/privacy code that was displayed before you entered mode functions or the channel/privacy code on which, during scanning, you last received a transmission. This will return the radio to Standby mode.

b. Press the Mode/Power button to proceed to other functions.

c. Press the Lock button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the channel/privacy code on which, during scanning, you last transmitted or received.

12

Image 17

Contents PR260 WXC For Assistance in Canada or the U.S.A Making Life Easier and SaferAutomated Help Desk Customer Assistance OperatorsProduct Features Belt Clip FeaturesLimited One-Year Warranty on Radios & Charger WarrantyCaring for Your microTALK Radio Replace battery compartment cover and belt clipRadio Charger Jack To charge batteries in radio Check to see that the batteries have been inserted properlySpeaker/Microphone/Charge Jack Using Your RadioTo connect a wall charger/adapter To attach a speaker/microphoneCommunicating with Another Person Auto Battery SaveTo Select a Channel To Adjust Volume Press the Volume Up or VolumeListening for a Response Call ButtonTo turn maximum range extender on Light/Max Range To temporarily turn off auto squelchTo turn maximum range extender off Lock FunctionMicroTALK Range Scrolling Through the Mode FunctionYour range will vary depending on terrain and conditions Set Privacy CodeTo select a privacy code Ctcss Privacy CodesTo turn VOX mode on or off Mode FunctionsNOAA* All Hazards Radio Channels To listen to all hazards radio channelsTo scan channels To Set VOX SensitivityChannel Scan This will return the radio to Standby mode To scan privacy codes Privacy Code ScanIf you press the Talk button while scanning and not within Press the Mode/Power button to proceed to other functionsTo change a call tone setting Five Call Tone SettingsOn or off setting is displayed Roger Beep Confirmation ToneGeneral Specifications General Specifications and LicensingLicensing Normal Position Safety and Trademark AcknowledgementSafety Information for microTALK Radios Product Service