Operation
Volume Select
Volume Level
Call Button
Roger Beep Icon
Mode/Lock Button
Roger Beep Off
Light/Max Range
Using Your Radio
Volume
•
To Adjust the Volume:
1.Press the Volume Up or Volume Down button.
A double beep sound is used to indicate the minimum and maximum volume levels (1 through 8).
Call Button
•
To Alert Another Person That You Are Calling:
1. Press and release the Call button.
The other person will hear a two (2) second ringing tone. You cannot send or receive transmissions during the two (2) second call tone.
“Roger Beep” Confirmation Tone
•
Your listener will hear an audible tone when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak. This feature can be turned On or Off.
When turning On your microTALK® radio for the first time, “Roger Beep” will be On.
To Turn “Roger Beep” On or Off:
1.Press and release the Mode/Lock button until the “Roger Beep” icon flashes. The current On or Off setting is displayed.
2.Press the Channel Up or Channel Down button to select “Roger Beep” On or Off.
3.a. Press the Mode/Lock button to enter the new setting and return to Standby Mode.
b Do not press any buttons for 15 seconds to enter the new setting and return to Standby Mode.
The setting you select will be saved when you turn your radio Off and On again. When the “Roger Beep” is On, the “Roger Beep” icon will be displayed.
Display Illumination
To Illuminate Your Display:
•
7 English
1.Press the Light/Max Range button to illuminate the display for ten (10) seconds.