Cobra Electronics FRS307 operating instructions Turning Roger Beep, Off and On, Setting Dual Watch

LOCK button

O P E R AT I O N ENGLISH

ENGLISH O P E R AT I O N

3. The radio will continue to scan all memory

locations and stop if an incoming

2.Press the MODE button until the Dual Watch icon flashes.

Turning Roger Beep	Turning Keystroke Tones
Off and On	Off and On

transmission is detected. The unit will

remain on that location for 10 seconds.

During that time you can:

a) Press and hold the TALK button and talk.

The radio will remain on that memory

location channel and return to Standby mode.

TALK button

b) Push the CHANNEL	CHANNEL SELECT
SELECT button up or
	button
down to resume
scanning memory
locations.

c) Press the MODE

button to proceed to other functions. If you do not press any button within 10 seconds, the radio will automatically resume scanning memory locations.

Setting Dual Watch

Dual watch allows you to simultaneously monitor any two channels/privacy codes you select. To program Dual Watch:

1.Select the first channel and privacy code you wish to monitor. (To review, see pages 3-4.)

MODE button

3. Push the CHANNEL	CHANNEL SELECT
SELECT button up or
	button
down to select the
second channel you
wish to monitor.

4.Press the MODE

button. The privacy code flashes.

MODE button

5. Push the CHANNEL SELECT button up or down to select the second privacy code.

6. Press and release the LOCK button to store the second channel/

privacy code and

engage Dual Watch. 7. To terminate Dual

Watch and return to normal Standby

mode, press and release the LOCK, TALK or MODE button.

With Roger Beep turned on, your listener will hear an audible tone when you release the TALK button. To change Roger Beep mode:

1.Press the MODE button until the Roger Beep icon flashes and the current setting (“on” or “off”) is displayed.

MODE button

2.Push the CHANNEL SELECT button up or down to turn Roger Beep on or off.

CHANNEL DOWN CHANNEL UP

3.To enter the new setting you can press and release the LOCK button, or press no buttons for 15 seconds. Press the MODE button to enter the new setting and proceed to other functions.

LOCK button	MODE
	button

With Keystroke Tones turned on, your unit will sound beeps each time you press a button or change a setting. To change Keystroke Tones mode:

1.Press the MODE button until the Keystroke tones icon flashes and the current setting (“on” or “off”) is displayed.

MODE button

2.Push the CHANNEL SELECT button up or down to turn Keystroke Tones on or off.

CHANNEL DOWN CHANNEL UP

3.To enter the new setting you can press and release the LOCK button, or press no buttons for 15 seconds. Press the MODE button to enter the new setting and proceed to other functions.

LOCK button	MODE
	button

11 12