System settings, Selecting the video format | Panasonic AV-HS450N

5. System settings

5-1. Selecting the video format

One system (input/output signal) video format can be selected.

Press the [SYSTEM] button to light its indicator and display the SYSTEM menu.

Refer to “2-1-5. LCD menu area”.

Turn [F1] to display the Format sub menu.

<Menu display>


SYS	1Mode↓	HiRes↓ 16:9SQ
Format	1080/59.94i		Off	Off

1080/50i

1080/24psf

1080/23.98psf

720/59.94p

720/50p

480/59.94i

576/50i

On

On

Turn [F2], select the format using the Mode item, and press the [F2] switch to enter the selection. An asterisk () appears at the left of the format currently selected.

Setting the 16:9 squeeze mode

When the 16:9 squeeze mode is selected, a border width (wipe or PinP) is established that considers cases where SD format images are to be converted into the 16:9 aspect ratio and used.

This setting is possible when SD is selected as the system format setting.

On the Format sub menu, turn [F5] to select whether to support the squeeze mode using the 16:9SQ item.

On: The squeeze mode is supported.

Off: The squeeze mode is not supported.

Border width (graphical representation) when the squeeze mode is supported

Squeeze (4:3)

16:9

131

Image 131

Panasonic AV-HS450N manual System settings, Selecting the video format, Setting the 169 squeeze mode

Contents

Control panel AV-HS450C1N Mainframe AV-HS450U1N FCC Note Safety precautions For USA-California Only Important Safety Instructions Contents Input/output signal settings System settings 131 Multiple formats supported FeaturesCompact design, wide variety of input/output signals Description Sdhc memory cards supported High-quality chroma keys using Primatte algorithmsRedundant power supply Many different effect functions incorporated Board ConfigurationAccessories Optional boards sold separately Precautions for use Trademarks and Registered Trademarks Handle the control panel carefully InstallationInstalling the control panel Choosing the best installation location Support guides Installing the mainframeHandle the mainframe carefully Blank panel Screw How to install the option boardsSlot a Slot B UTS INP DVI Mainframe Block diagramConnections DVI-D AV-HS450NHD SDI HD SDI VTR AC adapter PC monitor Example where the optional board is usedDVD player VTR HD SDI SD SDI Control panel  Power indicator Power Alarm indicator Alarm Functions in each area  PST/B bus crosspoint buttons PST/B 1 to Crosspoint area PGM/A bus crosspoint buttons PGM/A 1 to  Wipe pattern and memory selector buttons  Pattern page indicator LEDsWipe pattern/memory area  AUX bus crosspoint buttons Transition area User button area  CUT button  MIX button Wipe button  Auto button  Bus tally LEDs  Wipe direction selection buttons Wipe Direction N/R, R Fader lever List of menu delegation functions LCD menu area Basic menu operations  Menu function buttons Menu FUNCTION/AUX BUS Delegation Rotary encoders F1 to F5  Hold button Wipe Bkgd Positioner area Positioner X/Y  Rotary encoder Z SD memory cards  SD memory card access LEDSD memory card area SD memory card slot Rear panel connections area Mainframe  Power switch POWER1, POWER2 Power indicator POWER1, POWER2  Alarm indicator ALARM1, ALARM2  Reference input connector/BB output connector REF  SDI signal input connectors SDI Inputs 1 to SDI signal output connectors SDI Outputs 1 to  DVI-D output connectors DVI-D Outputs 5  Cooling fan  LAN connector LAN RJ-45 10/100 Base-TX Ground connector Signal GND AC power input socket IN1 IN2 AC 100 V to 120 V, 50/60 Hz Selecting the bus Selecting the bus using the Shift functionBasic operations Background transition Menu display All ShiftSingle Shift  Allocating the Shift function Basic operations PGM PGM/A PGM/A, PST/B PVW PST Selecting the bus mode Cut transition Selecting the transition modeManual transition using the fader lever Auto transition Image Setting the Image effects Executing the Image effect  Table of wipe patterns How to select the wipe patternsWipe Selecting the wipe pattern SL SL SQ2 squeezeSQ SQ Selecting the wipe direction Selecting the background for the 3D2 pattern Wipe decorations border, soft effect Setting the border and soft effectSetting the border color  To call the preset color Pos, Y-Pos setting range Setting the wipe start position  For key transitions Setting the lighting effectModifying wipe  For background transitions Setting the trimming Key Chroma chroma key/self key Selecting the key typeLum luminance key/self key Linear linear key/EXT key  Setting in the Config menu Selecting the key fill signalSelecting the key source signal  Setting with AUX bus crosspoint buttons Pattern examples Key transitions Key auto transition Key preview Operation Parameter Description of setting Setting range Adjusting the luminance key and linear key  To execute the sampling manually Adjusting the chroma keyStep  To execute the sampling automatically Step Sample1 Matte Cln.FG Sample1 CmpsitSpl.Spg Chrkey 3 View Mode Matte Spill- Spill+Spill Matte- Matte+ RstrDtl Detail- Detail+Detail MatSpng MkFGTrn FineTun Key decorations Setting the key edgeSetting the edge color Turn F2 to F5 to set the area to be masked Masking the key signals Flying key PinP combinations using the flying key Selecting the PinP channel and material PinP picture in picture PinP preview Selecting Shape PinP transitions PinP adjustmentsAdjusting the PinP position and size Select the dot by dot mode Adjusting the rotation angle Linking PinP1 and PinP2 Setting the priorityLinking PinP1 and PinP2 PinP decorations Trimming settings Selecting the DSK type DSK downstream key Setting the fill matte color Selecting the DSK channel and DSK fill material Selecting the DSK source signal DSK preview DSK transitions DSK adjustments DSK decorations Masking the DSK signals FTB fade to black Calling the preset colors Internal color signalsSetting the color background Adjusting the colors Selecting the AUX output materials Switching the AUX outputSignals that can be selected by the AUX bus Name of signal Description of signal AUX1 transitions Enable Enable Disable Disable Setting enable/disable for the AUX1 transition Memory Material selected Transition Pattern Menu Memory registration and recall items Storing the settings in the memory Store Recall Recalling the operations stored in the memory Recall Deleting the operations stored in the memory Delete Effect dissolve Transferring images from the AUX bus Frame memories Saving Images in Flash Memory SD memory cards Initializing the SD memory cards Saving data on SD memory cards SetUpConfiguration of folder at storage destination Characters which can be used for filenames Loading data from SD memory cards Displaying the SD memory card information Deleting files on SD memory cards List of settings by input signal Input/output signal settingsInput signal settings Setting the frame synchronizer List of input modes supported Setting the input mode Setting freeze Freezing the input signals Enabling the color corrector Color corrector  Adjusting the gain and hue of the C signal Input level Tone curveOutput level Adjusting the color matrix item gain Input image Setting the up-converter Fine-tuning of image positions Setting the analog input gain option Setting the analog composite input signals option Full-HD DVI Input Board Digital Setting the DVI input signals optionSetting the DVI input signals DVI Input Board Digital/Analog Initializing the adjusted values Automatic adjustment of the black levelAutomatic adjustment of the white level Fit-H 1920 1280  720 Fit-V 1024 768 1920 1200 DVI format Mode HD/1080i HD/720P1680 1050 1600 1200 Input XX DVIPhs ClkPhs H-Pos −16 −100 Adjusting the DVI input signals DownCnv Dig Setting the output signalsList of settings by output signal Manual Output connector Asign Assigning the output signals DC down-converter Assigning the CLN signal 115 116 LB letter box Setting the down-converter optionSQ squeeze EC edge crop Setting the sync signals Adjusting the output signal phase Phase adjustment setup Video effects SignalsFrame synchronizer Input For 1080/59.94i format Example Phase relationship between input signals and output signals Setting the screen layout Setting the multi view display Name of signal Display on LCD LUM 0%, 25%, 50%, 75%, 100% Setting the split frame and characters Setting the tally displays Changing the material names Preset type setting procedureUser type setting procedure High-resolution multi view mode  Examples of OSD displays Setting the on-screen display OSD Setting the embedded audio data Setting the ancillary dataSetting the V ancillary data Selecting the video format System settingsSetting the 169 squeeze mode Displaying the assignment statuses Setting the crosspointsAssigning signals to the crosspoints Assigning signals to the crosspoints Button Signal Button Signal Description Setting the crosspoint switching Function name Description of function Setting the user buttonsButton assignments Shift Setting method Setting the time Setting the date and timeSetting the date Display the MAC address Network settingsSetting the IP address Setting the subnet mask 60, 120 Other settingsSetting the LCD backlight Menu delegation settings External device control Enable/Disable Setting for Control of External Devices GVG AV-HS450N Editor controlTable of wipe patterns supported TALLY/GPI connector of control panel Setting the GPITALLY/GPI connector of mainframe Assign Item Description of function assigned Output  Control using the GPI input port Output from the GPI output port Assign Item Description of function assigned Control method Functions that can be controlled from the unit Camera control AW-RP655N Connection specifications AW-HE100N, AW-PH405N, AW-PH360N Pin No  Connections for AW-HE100N, AW-PH405N or AW-PH360N AV-HS450N AW-PH400P AW-IF400G Switch settingsSW1 SW2 SET UP OFF  Connections for AW-PH400P CAM CTL Camera control settings  For controlling the lens Zooming PanTilt and Zm/Focs Changing values Operation of F5 in the setup screen Selecting Yes/NoCameras menu operations Status displays Alarm status displaysAlarm message Alarm message displayed Type of trouble Operation Displaying the version information and option information Initializing Fader Initializing Setting DataInitialization LAN Connecting the control panel and mainframeExternal interfaces COM Editor Sub 50-pin, female, inch screw Example of GPI Out and Alarm connectionsTALLY/GPI Example of GPI In connections Tally LED Sub 25-pin, female, inch screwMax. current 50 mA LAN cable SpecificationsImage transmission functions Connections How to install the software Exit Setting the IP addressOperation Startup Transmitting images to the unit Transmitting images from the unit PVW Setting menu tableParameter Undo ↓ Reset ↓CHR KEY Chrkey PinP2 Trim ManualLeft Top Bottom Right TrimAdj Prior Synm Sync DSK2 DSK1Hue Sat Lum Load ↓ AUX1 TimeEnbl Cbgd EFF DslvFTB Imag B Imag a IMG aImag a Imag B IMG B XPT CAM MV2 Patt Split Pos SignalMV1 Patt Frame Char Label Tally MV1Frame RGB InputSDI Clear ↓ DVI ANA Output Outputyy DVI-I Enbl Sysconf ConfigLCD-BL Menudlg Shot MEM GPIP-Out GPIP-In USER1 USER2 USER3 CONFIG10CONFIG11 CONFIG12 System SYS System Select Board Version OptVer SYSSelect Version SysVer MainVer Control panel AppearanceMainframe Unit inch mm  Mainframe AV-HS450U1N Specifications Analog input SDI outputsComposite input Option Reference Video delay timeDVI-D input DVI-D output Weight Temperature HumidityPower supply Dimensions Supplied AC adaptor Supplied power cord Control panel AV-HS450C1N External media Appendix glossary Genlock Frame MemoryFreeze FTB Fade to Black Program Bus Preset BusPreset Memory Preview Technical Support Panasonic Broadcast & Television Systems CompanyEastern Zone Western Zone