4. Input/output signal settings

4-3-1. Assigning the output signals

Assign the output signals to OUTPUT1 to OUTPUT10.

Press the [OUTPUT] button to light its indicator and display the OUTPUT menu.

Refer to “2-1-5. LCD menu area”.

Turn [F1] to display the OUTPUTYY sub menu. (Y: OUT1 to OUT6, A1, A2, B1 or B2)

The output used to assign the output signal is selected for Y. Turn [F2] to display the Asign sub menu.

<Menu display>

OUTPUTYYAsign

Souce Mode↓

1/2

PGMNormal

PVW

CLN AUX1~4 MV1,MV2 KeyOut

DC

Turn [F3] to set the type of output signal using the Source item.

PGM: An image provided with the wipe, mix, key, downstream key or other effect is output at the switcher's main line output.

PVW: This is the preview output that enables the next operation to be checked before it is executed.

AUX 1 to 4: The signals selected by the AUX bus in lines 1 to 4 are output.

CLN: The clean signal (the image resulting when the key, downstream key or other effect has been removed from the PGM signal) is output.

Refer to “Assigning the CLN signal”.

MV 1, MV 2: The multi view display signals in two lines are output.

Multiple input signals and output signals are reduced in size and output to one screen.

KeyOut: The key signal is output.

113

Page 113
Image 113
Panasonic AV-HS450N manual Assigning the output signals