PinP picture in picture | Panasonic AV-HS450N guide

3. Basic operations

3-5. PinP (picture in picture)

Another image can be combined with the background image.

This unit supports two PinP channels.

3-5-1. Selecting the PinP channel and material

Press the [PinP 1/2] button among the AUX bus selector buttons.

When the button is lighted in amber, the PinP1 sub menu is displayed on the LCD, and the state in which the PinP1 materials are selected is now established for the AUX bus crosspoint buttons.

When the button is lighted in green, the PinP2 sub menu is displayed on the LCD, and the state in which the PinP2 materials are selected is now established for the AUX bus crosspoint buttons.

The selected AUX bus crosspoint button lights in amber. (It will light in red if the selected signal is a PGM output signal.)

<Menu display>

PinP1 1Shape CrclAspDensityPVW

PinP1

Square

0.0

100.0

Off

Circle

0.0

0.0

On

100.0

100.0

KEY

PinP1

DSK1

TIME

BKGD

IMAGE A

FMEM

CTL

CKEY

PinP2

DSK2

CBGD

IMAGE B

SDCard

CAM

KEY

PinP 1/2

DSK 1/2

AUX1 AUX2

AUX3

AUX4

XPT

MV

IN

OUT

1 2 3

CONFIG

SYS

4 5 6

CAM MEM

AMBER:1 / GREEN :2

AUX

MENU FUNCTION / AUX BUS DELEGATION

USER

SHIFT

64

Image 64

Panasonic AV-HS450N manual PinP picture in picture, Selecting the PinP channel and material

Contents

Mainframe AV-HS450U1N Control panel AV-HS450C1N Safety precautions FCC Note Important Safety Instructions For USA-California Only Contents Input/output signal settings System settings 131 Features Compact design, wide variety of input/output signalsDescription Multiple formats supported High-quality chroma keys using Primatte algorithms Redundant power supplyMany different effect functions incorporated Sdhc memory cards supported Configuration AccessoriesOptional boards sold separately Board Precautions for use Trademarks and Registered Trademarks Installation Installing the control panelChoosing the best installation location Handle the control panel carefully Handle the mainframe carefully Installing the mainframeSupport guides Slot a Slot B How to install the option boardsBlank panel Screw UTS INP DVI Connections Block diagramMainframe AV-HS450N HD SDIHD SDI VTR DVI-D Example where the optional board is used DVD playerVTR HD SDI SD SDI AC adapter PC monitor  Power indicator Power  Alarm indicator AlarmFunctions in each area Control panel  PGM/A bus crosspoint buttons PGM/A 1 to Crosspoint area PST/B bus crosspoint buttons PST/B 1 to  Pattern page indicator LEDs Wipe pattern/memory area AUX bus crosspoint buttons  Wipe pattern and memory selector buttons User button area Transition area  MIX button  Wipe button Auto button  CUT button  Fader lever  Wipe direction selection buttons Wipe Direction N/R, R Bus tally LEDs LCD menu area List of menu delegation functions  Menu function buttons Menu FUNCTION/AUX BUS Delegation  Rotary encoders F1 to F5 Hold button Basic menu operations Positioner area  Positioner X/Y Rotary encoder Z Wipe Bkgd  SD memory card access LED SD memory card areaSD memory card slot SD memory cards Rear panel connections area  Power switch POWER1, POWER2  Power indicator POWER1, POWER2 Alarm indicator ALARM1, ALARM2 Mainframe  SDI signal input connectors SDI Inputs 1 to  SDI signal output connectors SDI Outputs 1 to DVI-D output connectors DVI-D Outputs 5  Reference input connector/BB output connector REF  LAN connector LAN RJ-45 10/100 Base-TX  Ground connector Signal GNDAC power input socket IN1 IN2 AC 100 V to 120 V, 50/60 Hz  Cooling fan Selecting the bus using the Shift function Basic operationsBackground transition Selecting the bus All Shift Single Shift Allocating the Shift function Menu display Basic operations Selecting the bus mode PGM PGM/A PGM/A, PST/B PVW PST Selecting the transition mode Manual transition using the fader leverAuto transition Cut transition Setting the Image effects Image Executing the Image effect How to select the wipe patterns WipeSelecting the wipe pattern  Table of wipe patterns SQ SQ SQ2 squeezeSL SL Selecting the background for the 3D2 pattern Selecting the wipe direction Setting the border and soft effect Setting the border color To call the preset color Wipe decorations border, soft effect Setting the wipe start position Pos, Y-Pos setting range Setting the lighting effect Modifying wipe For background transitions  For key transitions Setting the trimming Key Selecting the key type Lum luminance key/self keyLinear linear key/EXT key Chroma chroma key/self key Selecting the key fill signal Selecting the key source signal Setting with AUX bus crosspoint buttons  Setting in the Config menu Key transitions Pattern examples Key preview Key auto transition Adjusting the luminance key and linear key Operation Parameter Description of setting Setting range Step  To execute the sampling automatically Adjusting the chroma key To execute the sampling manually Step Sample1 Matte Cln.FG Sample1 CmpsitSpl.Spg Chrkey 3 View Mode Spill Matte- Matte+ Spill- Spill+Matte Detail- Detail+ Detail MatSpngMkFGTrn RstrDtl FineTun Setting the edge color Setting the key edgeKey decorations Masking the key signals Turn F2 to F5 to set the area to be masked PinP combinations using the flying key Flying key PinP picture in picture Selecting the PinP channel and material Selecting Shape PinP preview Adjusting the PinP position and size PinP adjustmentsPinP transitions Adjusting the rotation angle Select the dot by dot mode Linking PinP1 and PinP2 Setting the priorityLinking PinP1 and PinP2 PinP decorations Trimming settings DSK downstream key Selecting the DSK type Setting the fill matte color Selecting the DSK source signal Selecting the DSK channel and DSK fill material DSK transitions DSK preview DSK adjustments DSK decorations Masking the DSK signals FTB fade to black Internal color signals Setting the color backgroundAdjusting the colors Calling the preset colors Switching the AUX output Signals that can be selected by the AUX busName of signal Description of signal Selecting the AUX output materials AUX1 transitions Setting enable/disable for the AUX1 transition Enable Enable Disable Disable Memory Memory registration and recall items Material selected Transition Pattern Menu Storing the settings in the memory Store Recalling the operations stored in the memory Recall Recall Deleting the operations stored in the memory Delete Effect dissolve Frame memories Transferring images from the AUX bus Saving Images in Flash Memory SD memory cards Initializing the SD memory cards Configuration of folder at storage destination SetUpSaving data on SD memory cards Loading data from SD memory cards Characters which can be used for filenames Deleting files on SD memory cards Displaying the SD memory card information Input signal settings Input/output signal settingsList of settings by input signal Setting the frame synchronizer Setting the input mode List of input modes supported Freezing the input signals Setting freeze Color corrector Enabling the color corrector  Adjusting the gain and hue of the C signal Output level Tone curveInput level Adjusting the color matrix item gain Setting the up-converter Input image Setting the analog input gain option Fine-tuning of image positions Setting the analog composite input signals option Setting the DVI input signals option Setting the DVI input signalsDVI Input Board Digital/Analog Full-HD DVI Input Board Digital Automatic adjustment of the white level Automatic adjustment of the black levelInitializing the adjusted values 1920 1280  720  Fit-V1024 768 Fit-H DVI format Mode HD/1080i HD/720P 1680 10501600 1200 1920 1200 Adjusting the DVI input signals Input XX DVIPhs ClkPhs H-Pos −16 −100 Setting the output signals List of settings by output signalManual Output connector Asign DownCnv Dig Assigning the output signals Assigning the CLN signal DC down-converter 115 116 Setting the down-converter option SQ squeezeEC edge crop LB letter box Setting the sync signals Adjusting the output signal phase Phase adjustment setup Signals Frame synchronizerInput Video effects Phase relationship between input signals and output signals For 1080/59.94i format Example Setting the multi view display Setting the screen layout Name of signal Display on LCD Setting the split frame and characters LUM 0%, 25%, 50%, 75%, 100% Setting the tally displays User type setting procedure Preset type setting procedureChanging the material names High-resolution multi view mode Setting the on-screen display OSD  Examples of OSD displays Setting the V ancillary data Setting the ancillary dataSetting the embedded audio data Setting the 169 squeeze mode System settingsSelecting the video format Setting the crosspoints Assigning signals to the crosspointsAssigning signals to the crosspoints Displaying the assignment statuses Button Signal Description Button Signal Setting the crosspoint switching Button assignments Setting the user buttonsFunction name Description of function Setting method Shift Setting the date Setting the date and timeSetting the time Network settings Setting the IP addressSetting the subnet mask Display the MAC address Other settings Setting the LCD backlightMenu delegation settings 60, 120 Enable/Disable Setting for Control of External Devices External device control Table of wipe patterns supported Editor controlGVG AV-HS450N TALLY/GPI connector of mainframe Setting the GPITALLY/GPI connector of control panel  Control using the GPI input port  Output from the GPI output portAssign Item Description of function assigned Control method Assign Item Description of function assigned Output Camera control Functions that can be controlled from the unit Connection specifications AW-RP655N  Connections for AW-HE100N, AW-PH405N or AW-PH360N AW-HE100N, AW-PH405N, AW-PH360N Pin No AW-IF400G Switch settings SW1 SW2 SET UP OFF Connections for AW-PH400P AV-HS450N AW-PH400P Camera control settings CAM CTL PanTilt and Zm/Focs  For controlling the lens Zooming Cameras menu operations Operation of F5 in the setup screen Selecting Yes/NoChanging values Alarm status displays Alarm messageAlarm message displayed Type of trouble Operation Status displays Displaying the version information and option information Initialization Initializing Setting DataInitializing Fader External interfaces Connecting the control panel and mainframeLAN Editor COM Example of GPI Out and Alarm connections TALLY/GPIExample of GPI In connections Sub 50-pin, female, inch screw Max. current 50 mA Sub 25-pin, female, inch screwTally LED Specifications Image transmission functionsConnections LAN cable How to install the software Setting the IP address OperationStartup Exit Transmitting images to the unit Transmitting images from the unit Parameter Setting menu tablePVW CHR KEY Chrkey Reset ↓Undo ↓ Trim Manual Left Top Bottom Right TrimAdjPrior Synm Sync PinP2 Hue Sat Lum Load ↓ DSK1DSK2 Enbl TimeAUX1 FTB EFF DslvCbgd Imag a IMG a Imag aImag B IMG B Imag B CAM XPT Split Pos Signal MV1 PattFrame Char Label Tally MV1Frame MV2 Patt Input SDIClear ↓ RGB ANA DVI Output Outputyy DVI-I Config LCD-BL MenudlgShot MEM Enbl Sysconf GPIP-In GPIP-Out CONFIG10 CONFIG11CONFIG12 USER1 USER2 USER3 System System SYS SYS Select Version SysVerMainVer Select Board Version OptVer Appearance MainframeUnit inch mm Control panel Specifications  Mainframe AV-HS450U1N SDI outputs Composite inputOption Analog input Video delay time DVI-D inputDVI-D output Reference Temperature Humidity Power supplyDimensions Weight Supplied power cord  Control panel AV-HS450C1NExternal media Supplied AC adaptor Appendix glossary Frame Memory FreezeFTB Fade to Black Genlock Preset Bus Preset MemoryPreview Program Bus Panasonic Broadcast & Television Systems Company Eastern ZoneWestern Zone Technical Support