Panasonic AV-HS450N manual Adjusting the output signal phase

4. Input/output signal settings

4-7. Adjusting the output signal phase

The phase of the output video signals can be adjusted.

Press the [SYSTEM] button to light its indicator and display the SYSTEM menu.

Refer to “2-1-5. LCD menu area”.

Turn [F1] to display the OutPhs sub menu.

<Menu display>

SYS	2System H-PhaseV-Phase
OutPhs		1H	0	0

0H

−1320

+1319

−100

+100

Turn [F2], and select 0H or 1H using the System item.

0H: The output video signals are output to the system REF signal with using in-phase. The frame synchronizer function is ON for all input signals.

1H: The output video signals are output to the system REF signal with 1H delay.

When the frame synchronizer function is ON, the output video signals are output with 1 frame + 1H delay.

Turn [F3] to adjust H phase using the H-Phase item. H-Phase can be adjusted within a range of –0.5H to +0.5H.

The setting displayed on the menu differs depending on the video format.

Turn [F4] to adjust V phase using the V-Phase item. V-Phase can be adjusted within a range of –100H to +100H.

119