Panasonic AV-HS450N manual DVI-D input, DVI-D output, Reference, Input/output, Video delay time

10. Specifications

DVI-D input	Digital RGB:
(option)	XGA (1024768), WXGA (1280768), SXGA (12801024), WSXGA+ (16801050),
	UXGA (16001200), WUXGA (19201200)
	Vertical frequency: 60 Hz
	Digital RGB: 1080/50P, 1080/59.94P
	 Analog input signals are not supported.
	4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2
		(When two AV-HS04M8 boards are used)
	 The DVI-I connector cable cannot be used.
	 For the DVI-D connector cable, use a cable with a length of up to 5 m.
DVI-D output	Digital RGB:
	XGA (1024768), WXGA (1280768), SXGA (12801024), WSXGA+ (16801050),
	UXGA (16001200), WUXGA (19201200)
	Vertical frequency: 60 Hz
	Digital RGB: 1080/50P, 1080/59.94P
	 Analog output signals are not supported.
	 High-resolution multi view mode supported:
	Signals are also output with a high resolution even when SD has been selected as the
	system mode.
	With this mode setting, MV1 is output to OUT5 and MV2 to OUT6; MV1 and MV2
	cannot be output to any other outputs.
	2 lines, standard: OUT5, OUT6
	 The DVI-I connector cable cannot be used.
	 For the DVI-D connector cable, use a cable with a length of up to 5 m.
Reference	In gen-lock mode: Black burst or Tri-level Sync input signals (with loop-through)
input/output	In internal sync mode: Black burst output signals 2
	 Same field frequencies as those of the system formats supported
	 With the 1080/23.98PsF and 24PsF formats, only GENLOCK mode supported
	 With the 1080/23.98PsF format, black burst with 10F-ID (SMPTE318M standard met)
	or TRI signals supported
Video delay time	FS OFF, U/C OFF	1 line (H)
	FS ON or U/C ON	1 frame (F)
	 When the signals have passed through DVE, multi view, down-converter, DVI-IN or
	DVI-OUT, a maximum delay of 1 frame is applied in each case.

184