5. System settings

Turn [F1] to display the CamCTL2 sub menu.

<Menu display>

CAM

2CTL

PosContPTSpeedPower↓

CamCTL2

1PanTilt

Fast

On

1~5 Zm/Focs

Middle Slow

Off

Turn [F2] to set the camera to be controlled using the CTL item.

Turn [F3] to select the control to be exercised by operating the positioner using the PosCont item.

PanTilt: Panning is controlled by left/right (X) operation; tilting is controlled by up/down (Y) operation.

Zm/Focs: Lens focusing is controlled by left/right (X) operation; lens zooming is controlled by up/down

(Y) operation.

Each time the rotary encoder [Z] is pressed, the PanTilt or Zm/Focs setting is selected alternately.

Control of lens focusing is possible when the lens focus of the camera is set to manual operation.

If the crosspoint buttons (PGM/A 1 to 32 and PST/B 1 to 32) are held down when “P/ TCont” or “P/TDirt” is selected as the Protcol item setting, delegation to the CamCTL2 menu is initiated.

 

For switching between

 

PanTilt and Zm/Focs

For controlling the tilting

Z

For controlling the lens

 

zooming

POSITIONER

For controlling the panning

For controlling the lens focusing

Turn [F4] to set the control (panning, tilting, lens focusing and lens zooming) speed using the PTSpeed Item. Fast: Control is exercised at the fastest speed.

Middle: Control is exercised at the medium speed.

(This cannot be selected for the control of lens focusing or lens zooming.)

Slow: Control is exercised at the slowest speed.

When controlling the pan-tilt head’s power to On, turn [F5] to select On, and press the [F5] switch. When controlling it to Off, turn [F5] to select Off, and press the [F5] switch.

After turning the pan-tilt head’s power to On, make sure to use this operation to turn the selection On. This setting can be performed when "P/TDirt" has been selected as the Protocol item setting on the CamCTL1 sub menu.

The menu display (On or Off) does not indicate the status of the camera.

149

Page 149
Image 149
Panasonic AV-HS450N manual PanTilt and Zm/Focs,  For controlling the lens Zooming