Panasonic AV-HS450N manual Editor, Com

6. External interfaces

6-2-2. EDITOR

The unit can be controlled by an external device by connecting the device to the EDITOR connector. Use it with the settings below.

Baud rate:	38400 bps					RS-422, D-sub 9-pin, female, inch screw
Parity:	ODD
						Pin No.	Signal name	Description of signal
Stop bit:	1 bit					1	FRAME GROUND	Frame ground
	5	4	3	2	1	2	TXD –	Send data (–)
						3	RXD +	Receive data (+)
		9	8	7	6
						4	GROUND	Ground
						5	NC	Not used
						6	GROUND	Ground
						7	TXD +	Send data (+)
						8	RXD –	Receive data (–)
						9	FRAME GROUND	Frame ground

6-2-3. COM

One or more Panasonic pan-tilt head systems can be controlled by the unit by connecting the system to the COM connector.

For details on the connections, refer to “5-7-4. Camera control”.

5 4 3 2 1

9 8 7 6

RS-422, D-sub 9-pin, female, inch screw

Pin No.	Signal name	Description of signal
1	FRAME GROUND	Frame ground
2	RXD –	Receive data (–)
3	TXD +	Send data (+)
4	GROUND	Ground
5	NC	Not used
6	GROUND	Ground
7	RXD +	Receive data (+)
8	TXD –	Send data (–)
9	FRAME GROUND	Frame ground

The pin assignment is different from that of the EDITOR connector.

155