Panasonic AV-HS450N manual Wipe pattern/memory area,  AUX bus crosspoint buttons

2.Functions in each area

AUX bus crosspoint buttons

These buttons are used to select the source of the bus which was selected by the AUX bus selector button (). Buttons 1 to 32 can be selected using the [SHIFT] button.

 Refer to “3-1-2. Selecting the bus using the SHIFT function”.

2-1-2. Wipe pattern/memory area

  

Wipe pattern and memory selector buttons

Wipe patterns 1 to 12 can be selected while the BKGD and KEY pattern selector buttons () are lighted.

Data can be stored in the memories of buttons 1 to 10 or recalled from these memories while one of the memory operation buttons () — [SHOT MEM], [BKGD WIPE MEM], [PinP MEM] or [CAM MEM] — is lighted.

SHOT

MEM

BKGD WIPE MEM

PinP

MEM

CAM MEM

STOR

RE

CALL

DEL

UNDO

1	2	3	PAGE
			WIPE
1	2	3	SQ1	SQ2
4	5	6	SL1	SL2
4	5	6	3D1	3D2
			BKGD
7	8	9	PATT
7	8	9		
10	11	12	KEY
			PATT

10 XPT DSBL EFF DSLV

MEMORY / PATTERN

BKGD, KEY pattern selector buttons [BKGD PATT] [KEY PATT]

Press the [BKGD PATT] button, and while it is lighted, select the wipe pattern for the background transition. Similarly, press the [KEY PATT] button, and while it is lighted, select the wipe pattern for the key transition. Each time the [BKGD PATT] button and [KEY PATT] button are pressed, the pattern page changes in the following sequence: WIPE, SQ1 (squeeze 1), SL1 (slide 1), 3D1 (3 dimensions 1), SQ2 (squeeze 2), SL2 (slide 2) and 3D2 (3 dimensions 2). Which pattern page has been selected can be checked by observing which pattern page indicator LED () is lighted.

SQ2, SL2, and 3D2 may not be selected as the wipe pattern for the key transition.

Pattern page indicator LEDs [PAGE]

By observing which pattern page indicator LED is lighted, it is possible to check which pattern page has been selected by the BKDG PATT or KEY PATT selector button ().

Memory operation buttons [SHOT MEM] [BKGD WIPE MEM] [PinP MEM] [CAM MEM]

[STOR] [RECALL] [DEL] [UNDO]

Press the [SHOT MEM], [BKGD WIPE MEM], [PinP MEM] or [CAM MEM] button to perform the memory operations for the number keys (1 to 10).

[STOR]:

Press this to register data in the memory.

[RECALL]:

Press this to recall data from the memory.

[DEL]:

Press this to delete data in the memory.

[UNDO]:

Press this to undo the operation of the [RECALL] or [DEL] button. The number of operations that can be undone is one only.

This operation cannot be performed using memory operations when the [CAM MEM] button has been pressed.

21