Panasonic AV-HS450N  MIX button,  Wipe button,  Auto button,  CUT button,  KEY on button

2.Functions in each area

[MIX] button

This is used to switch the A and B bus images while making them overlap. During the transition, the A and B bus output total is kept at 100 %.

When the [MIX] button is pressed and it is selected, its indicator lights in amber.

If the [WIPE] button () is now pressed, it goes off, and the de-selected status is established.

[WIPE] button

This is used to execute the transition using the pattern selected by the wipe pattern selector button (). When the [WIPE] button is pressed and it is selected, its indicator lights in amber.

If the [MIX] button () is now pressed, it goes off, and the de-selected status is established.

[AUTO] button

This is used to automatically execute transitions (auto transition) using the transition time which has been set on the TIME menu.

During auto transition its indicator lights in amber. When the button is pressed again during auto transition, the auto transition operation is suspended, and the indicator lights in green. When it is pressed again while auto transition is suspended, the remaining transition is executed.

The indicator goes off when auto transition is completed.

When the [AUTO] button is pressed while the fader lever () is at an interim setting, the transition is executed in the time remaining from the interim setting.

[CUT] button

This button is used to execute transitions instantly.

Its indicator lights in amber during a transition, and it goes off when the transition is completed.

[KEY ON] button

This button is used to execute the key transition for the transition time which has been set on the TIME menu.

[FTB ON] button

This button is used to execute fade-out to a black screen or fade-in from a black screen for the transition time which has been set on the TIME menu.

PinP button [PinP1 ON] [PinP2 ON]

This button is used to execute fade-in or fade-out of the picture in picture for the transition time which has been set on the TIME menu.

DSK button [DSK1 ON] [DSK2 ON]

This button is used to execute fade-in or fade-out of downstream key for the transition time which has been set on the TIME menu.

23