Panasonic AV-HS450N manual Setting the GPI, TALLY/GPI connector of mainframe

5. System settings

5-7-3. Setting the GPI

The user can set the functions that are to be controlled from the GPI ports and set whether to enable the control.

Refer to “6-2-4. TALLY/GPI” and “6-3-1. TALLY/GPI”.

Press the [CONFIG] button to light its indicator and display the CONFIG menu.

Refer to “2-1-5. LCD menu area”.

Turn [F1] to display the sub menu corresponding to the TALLY/GPI connector concerned and set the function to be controlled by the GPI port.

TALLY/GPI connector of mainframe:

GPIM-In sub menu and GPIM-Out sub menu

<Menu display>

CONFIG 4Port		Assign	GPIEN
GPIM-In		—NoAsign	Disable
	Port1~8			Enable

TALLY/GPI connector of control panel:

GPIP-In sub menu and GPIP-Out sub menu

<Menu display>

CONFIG 6Port		Assign	GPIEN
GPIP-In		—NoAsign	Disable
	Port1~8			Enable

CONFIG 5Port		Assign	GPIEN
GPIM-Out		—NoAsign	Disable
	Port1			Enable
	Port31

CONFIG 7Port		Assign	GPIEN
GPIP-Out		—NoAsign	Disable
	Port1~8			Enable

Turn [F2] to select the port to be controlled using the Port item.

Turn [F3] to select the function to be assigned using the Assign item.

Refer to “Control using the GPI input port” and “Output from the GPI output port”.

Turn [F5] to set enable or disable for the control to be exercised from each port using the GPIEN item.

Enable: Control is enabled.

Disable: Control is disabled.

Settings for the GPIEN item can be assigned to one of the user buttons.

See “5-3-1. Setting the user buttons”.

142