DSK adjustments | Panasonic AV-HS450N manual

3. Basic operations

3-6-5. DSK adjustments

The DSK definition can be adjusted.

Press the [DSK1] button (or [DSK2] button) to light its indicator and display the DSK1 menu (or DSK2 menu).

Refer to “2-1-5. LCD menu area”.

Turn [F1] to display the Adjust sub menu.

<Menu display>

DSK1 2Clip Gain DensityInvert

Adjust 0.0 100.0 100.0 Off

Turn [F2], [F3] and [F4] to adjust the DSK (downstream key) definition.

Turn [F5] to set key invert.

If On is set, the key signals generated internally are inverted.

Operation	Parameter	Description of setting	Setting range
F2	Clip	Reference level for generating key signals	0.0 to 108.0
F3	Gain	Key amplitude	0.0 to 200.0

F4	Density	Key density	0.0 to 100.0
F5	Invert	Key signal inversion	On, Off

Page 75

Image 75

Panasonic AV-HS450N manual DSK adjustments, Operation Parameter Description of setting Setting range

Contents

Control panel AV-HS450C1N Mainframe AV-HS450U1N FCC Note Safety precautions For USA-California Only Important Safety Instructions Contents Input/output signal settings System settings 131 Multiple formats supported FeaturesCompact design, wide variety of input/output signals Description Sdhc memory cards supported High-quality chroma keys using Primatte algorithmsRedundant power supply Many different effect functions incorporated Board ConfigurationAccessories Optional boards sold separately Precautions for use Trademarks and Registered Trademarks Handle the control panel carefully InstallationInstalling the control panel Choosing the best installation location Installing the mainframe Handle the mainframe carefullySupport guides How to install the option boards Slot a Slot BBlank panel Screw UTS INP DVI Block diagram ConnectionsMainframe DVI-D AV-HS450NHD SDI HD SDI VTR AC adapter PC monitor Example where the optional board is usedDVD player VTR HD SDI SD SDI Control panel  Power indicator Power Alarm indicator Alarm Functions in each area Crosspoint area  PGM/A bus crosspoint buttons PGM/A 1 to PST/B bus crosspoint buttons PST/B 1 to  Wipe pattern and memory selector buttons  Pattern page indicator LEDsWipe pattern/memory area  AUX bus crosspoint buttons Transition area User button area  CUT button  MIX button Wipe button  Auto button  Wipe direction selection buttons Wipe Direction N/R, R  Fader lever Bus tally LEDs List of menu delegation functions LCD menu area Basic menu operations  Menu function buttons Menu FUNCTION/AUX BUS Delegation Rotary encoders F1 to F5  Hold button Wipe Bkgd Positioner area Positioner X/Y  Rotary encoder Z SD memory cards  SD memory card access LEDSD memory card area SD memory card slot Rear panel connections area Mainframe  Power switch POWER1, POWER2 Power indicator POWER1, POWER2  Alarm indicator ALARM1, ALARM2  Reference input connector/BB output connector REF  SDI signal input connectors SDI Inputs 1 to SDI signal output connectors SDI Outputs 1 to  DVI-D output connectors DVI-D Outputs 5  Cooling fan  LAN connector LAN RJ-45 10/100 Base-TX Ground connector Signal GND AC power input socket IN1 IN2 AC 100 V to 120 V, 50/60 Hz Selecting the bus Selecting the bus using the Shift functionBasic operations Background transition Menu display All ShiftSingle Shift  Allocating the Shift function Basic operations PGM PGM/A PGM/A, PST/B PVW PST Selecting the bus mode Cut transition Selecting the transition modeManual transition using the fader lever Auto transition Image Setting the Image effects Executing the Image effect  Table of wipe patterns How to select the wipe patternsWipe Selecting the wipe pattern SQ2 squeeze SQ SQSL SL Selecting the wipe direction Selecting the background for the 3D2 pattern Wipe decorations border, soft effect Setting the border and soft effectSetting the border color  To call the preset color Pos, Y-Pos setting range Setting the wipe start position  For key transitions Setting the lighting effectModifying wipe  For background transitions Setting the trimming Key Chroma chroma key/self key Selecting the key typeLum luminance key/self key Linear linear key/EXT key  Setting in the Config menu Selecting the key fill signalSelecting the key source signal  Setting with AUX bus crosspoint buttons Pattern examples Key transitions Key auto transition Key preview Operation Parameter Description of setting Setting range Adjusting the luminance key and linear key Adjusting the chroma key Step  To execute the sampling automatically To execute the sampling manually Step Sample1 Matte Cln.FG Sample1 CmpsitSpl.Spg Chrkey 3 View Mode Spill- Spill+ Spill Matte- Matte+Matte RstrDtl Detail- Detail+Detail MatSpng MkFGTrn FineTun Setting the key edge Setting the edge colorKey decorations Turn F2 to F5 to set the area to be masked Masking the key signals Flying key PinP combinations using the flying key Selecting the PinP channel and material PinP picture in picture PinP preview Selecting Shape PinP adjustments Adjusting the PinP position and sizePinP transitions Select the dot by dot mode Adjusting the rotation angle Setting the priority Linking PinP1 and PinP2Linking PinP1 and PinP2 PinP decorations Trimming settings Selecting the DSK type DSK downstream key Setting the fill matte color Selecting the DSK channel and DSK fill material Selecting the DSK source signal DSK preview DSK transitions DSK adjustments DSK decorations Masking the DSK signals FTB fade to black Calling the preset colors Internal color signalsSetting the color background Adjusting the colors Selecting the AUX output materials Switching the AUX outputSignals that can be selected by the AUX bus Name of signal Description of signal AUX1 transitions Enable Enable Disable Disable Setting enable/disable for the AUX1 transition Memory Material selected Transition Pattern Menu Memory registration and recall items Storing the settings in the memory Store Recall Recalling the operations stored in the memory Recall Deleting the operations stored in the memory Delete Effect dissolve Transferring images from the AUX bus Frame memories Saving Images in Flash Memory SD memory cards Initializing the SD memory cards SetUp Configuration of folder at storage destinationSaving data on SD memory cards Characters which can be used for filenames Loading data from SD memory cards Displaying the SD memory card information Deleting files on SD memory cards Input/output signal settings Input signal settingsList of settings by input signal Setting the frame synchronizer List of input modes supported Setting the input mode Setting freeze Freezing the input signals Enabling the color corrector Color corrector  Adjusting the gain and hue of the C signal Tone curve Output levelInput level Adjusting the color matrix item gain Input image Setting the up-converter Fine-tuning of image positions Setting the analog input gain option Setting the analog composite input signals option Full-HD DVI Input Board Digital Setting the DVI input signals optionSetting the DVI input signals DVI Input Board Digital/Analog Automatic adjustment of the black level Automatic adjustment of the white levelInitializing the adjusted values Fit-H 1920 1280  720 Fit-V 1024 768 1920 1200 DVI format Mode HD/1080i HD/720P1680 1050 1600 1200 Input XX DVIPhs ClkPhs H-Pos −16 −100 Adjusting the DVI input signals DownCnv Dig Setting the output signalsList of settings by output signal Manual Output connector Asign Assigning the output signals DC down-converter Assigning the CLN signal 115 116 LB letter box Setting the down-converter optionSQ squeeze EC edge crop Setting the sync signals Adjusting the output signal phase Phase adjustment setup Video effects SignalsFrame synchronizer Input For 1080/59.94i format Example Phase relationship between input signals and output signals Setting the screen layout Setting the multi view display Name of signal Display on LCD LUM 0%, 25%, 50%, 75%, 100% Setting the split frame and characters Setting the tally displays Preset type setting procedure User type setting procedureChanging the material names High-resolution multi view mode  Examples of OSD displays Setting the on-screen display OSD Setting the ancillary data Setting the V ancillary dataSetting the embedded audio data System settings Setting the 169 squeeze modeSelecting the video format Displaying the assignment statuses Setting the crosspointsAssigning signals to the crosspoints Assigning signals to the crosspoints Button Signal Button Signal Description Setting the crosspoint switching Setting the user buttons Button assignmentsFunction name Description of function Shift Setting method Setting the date and time Setting the dateSetting the time Display the MAC address Network settingsSetting the IP address Setting the subnet mask 60, 120 Other settingsSetting the LCD backlight Menu delegation settings External device control Enable/Disable Setting for Control of External Devices Editor control Table of wipe patterns supportedGVG AV-HS450N Setting the GPI TALLY/GPI connector of mainframeTALLY/GPI connector of control panel Assign Item Description of function assigned Output  Control using the GPI input port Output from the GPI output port Assign Item Description of function assigned Control method Functions that can be controlled from the unit Camera control AW-RP655N Connection specifications AW-HE100N, AW-PH405N, AW-PH360N Pin No  Connections for AW-HE100N, AW-PH405N or AW-PH360N AV-HS450N AW-PH400P AW-IF400G Switch settingsSW1 SW2 SET UP OFF  Connections for AW-PH400P CAM CTL Camera control settings  For controlling the lens Zooming PanTilt and Zm/Focs Operation of F5 in the setup screen Selecting Yes/No Cameras menu operationsChanging values Status displays Alarm status displaysAlarm message Alarm message displayed Type of trouble Operation Displaying the version information and option information Initializing Setting Data InitializationInitializing Fader Connecting the control panel and mainframe External interfacesLAN COM Editor Sub 50-pin, female, inch screw Example of GPI Out and Alarm connectionsTALLY/GPI Example of GPI In connections Sub 25-pin, female, inch screw Max. current 50 mATally LED LAN cable SpecificationsImage transmission functions Connections How to install the software Exit Setting the IP addressOperation Startup Transmitting images to the unit Transmitting images from the unit Setting menu table ParameterPVW Reset ↓ CHR KEY ChrkeyUndo ↓ PinP2 Trim ManualLeft Top Bottom Right TrimAdj Prior Synm Sync DSK1 Hue Sat Lum Load ↓DSK2 Time EnblAUX1 EFF Dslv FTBCbgd Imag B Imag a IMG aImag a Imag B IMG B XPT CAM MV2 Patt Split Pos SignalMV1 Patt Frame Char Label Tally MV1Frame RGB InputSDI Clear ↓ DVI ANA Output Outputyy DVI-I Enbl Sysconf ConfigLCD-BL Menudlg Shot MEM GPIP-Out GPIP-In USER1 USER2 USER3 CONFIG10CONFIG11 CONFIG12 System SYS System Select Board Version OptVer SYSSelect Version SysVer MainVer Control panel AppearanceMainframe Unit inch mm  Mainframe AV-HS450U1N Specifications Analog input SDI outputsComposite input Option Reference Video delay timeDVI-D input DVI-D output Weight Temperature HumidityPower supply Dimensions Supplied AC adaptor Supplied power cord Control panel AV-HS450C1N External media Appendix glossary Genlock Frame MemoryFreeze FTB Fade to Black Program Bus Preset BusPreset Memory Preview Technical Support Panasonic Broadcast & Television Systems CompanyEastern Zone Western Zone

Panasonic AV-HS450N DSK adjustments, Operation Parameter Description of setting Setting range

Models: AV-HS450N

3. Basic operations

3-6-5. DSK adjustments

<Menu display>

Operation

Parameter

Description of setting

Setting range