Manuals / Panasonic / Computer Equipment / Switch

Panasonic AV-HS450N manual Setting the tally displays

Models: AV-HS450N

1 190

Download 190 pages 2.41 Kb

Page 126

4. Input/output signal settings

4-8-3. Setting the tally displays

Set the tally displays to be superimposed onto the split frame of the multi view display. The red tally indicates material consisting of program outputs.

The green tally indicates material selected by the preset bus.

On the MV1 Frame or MV2 Frame sub menu, turn [F5] to set the tally displays using the Tally item.

<Menu display>

MV	2Frame	CharLabel	Tally
MV1Frame LUM75%		LUM75%	OnRed+GRN

MV	4Frame	CharLabel	Tally
MV2Frame LUM75%		LUM75%	OnRed+GRN

LUM 0% LUM 0% LUM25% LUM25% LUM50% LUM50% LUM100% LUM100%

Off Off

Off

Red Off

LUM 0% LUM 0% LUM25% LUM25% LUM50% LUM50% LUM100% LUM100%

Off Off

Off

Red Off

Red+GRN: Both the red tally and green tally are displayed.

Red: Only the red tally is displayed.

Off: No tally displays are shown.

The red tally is not displayed during FTB operation while the program images have been completely faded out to a black screen. At this time, the green tally is displayed for images consisting of program images.

The red tally and green tally signals are output from the tally output connector on the rear panel.  Refer to “5-7-3. Setting the GPI”.

126

Image 126

Panasonic AV-HS450N manual Setting the tally displays

Contents

Mainframe AV-HS450U1N Control panel AV-HS450C1NSafety precautions FCC NoteImportant Safety Instructions For USA-California OnlyContents Input/output signal settings System settings 131 Description FeaturesCompact design, wide variety of input/output signals Multiple formats supportedMany different effect functions incorporated High-quality chroma keys using Primatte algorithmsRedundant power supply Sdhc memory cards supportedOptional boards sold separately ConfigurationAccessories BoardPrecautions for use Trademarks and Registered Trademarks Choosing the best installation location InstallationInstalling the control panel Handle the control panel carefullyInstalling the mainframe Handle the mainframe carefullySupport guides How to install the option boards Slot a Slot BBlank panel Screw UTS INP DVI Block diagram ConnectionsMainframe HD SDI VTR AV-HS450NHD SDI DVI-DVTR HD SDI SD SDI Example where the optional board is usedDVD player AC adapter PC monitorFunctions in each area  Power indicator Power Alarm indicator Alarm Control panelCrosspoint area  PGM/A bus crosspoint buttons PGM/A 1 to PST/B bus crosspoint buttons PST/B 1 to  AUX bus crosspoint buttons  Pattern page indicator LEDsWipe pattern/memory area  Wipe pattern and memory selector buttonsUser button area Transition area Auto button  MIX button Wipe button  CUT button Wipe direction selection buttons Wipe Direction N/R, R  Fader lever Bus tally LEDs LCD menu area List of menu delegation functions Hold button  Menu function buttons Menu FUNCTION/AUX BUS Delegation Rotary encoders F1 to F5 Basic menu operations Rotary encoder Z Positioner area Positioner X/Y Wipe BkgdSD memory card slot  SD memory card access LEDSD memory card area SD memory cardsRear panel connections area  Alarm indicator ALARM1, ALARM2  Power switch POWER1, POWER2 Power indicator POWER1, POWER2 Mainframe DVI-D output connectors DVI-D Outputs 5  SDI signal input connectors SDI Inputs 1 to SDI signal output connectors SDI Outputs 1 to  Reference input connector/BB output connector REFAC power input socket IN1 IN2 AC 100 V to 120 V, 50/60 Hz  LAN connector LAN RJ-45 10/100 Base-TX Ground connector Signal GND  Cooling fanBackground transition Selecting the bus using the Shift functionBasic operations Selecting the bus Allocating the Shift function All ShiftSingle Shift Menu displayBasic operations Selecting the bus mode PGM PGM/A PGM/A, PST/B PVW PSTAuto transition Selecting the transition modeManual transition using the fader lever Cut transitionSetting the Image effects ImageExecuting the Image effect Selecting the wipe pattern How to select the wipe patternsWipe  Table of wipe patternsSQ2 squeeze SQ SQSL SL Selecting the background for the 3D2 pattern Selecting the wipe direction To call the preset color Setting the border and soft effectSetting the border color Wipe decorations border, soft effectSetting the wipe start position Pos, Y-Pos setting range For background transitions Setting the lighting effectModifying wipe  For key transitionsSetting the trimming Key Linear linear key/EXT key Selecting the key typeLum luminance key/self key Chroma chroma key/self key Setting with AUX bus crosspoint buttons Selecting the key fill signalSelecting the key source signal  Setting in the Config menuKey transitions Pattern examplesKey preview Key auto transitionAdjusting the luminance key and linear key Operation Parameter Description of setting Setting rangeAdjusting the chroma key Step  To execute the sampling automatically To execute the sampling manually Step Sample1 Matte Cln.FG Sample1 CmpsitSpl.Spg Chrkey 3 View Mode Spill- Spill+ Spill Matte- Matte+Matte MkFGTrn Detail- Detail+Detail MatSpng RstrDtlFineTun Setting the key edge Setting the edge colorKey decorations Masking the key signals Turn F2 to F5 to set the area to be maskedPinP combinations using the flying key Flying keyPinP picture in picture Selecting the PinP channel and materialSelecting Shape PinP previewPinP adjustments Adjusting the PinP position and sizePinP transitions Adjusting the rotation angle Select the dot by dot modeSetting the priority Linking PinP1 and PinP2Linking PinP1 and PinP2 PinP decorations Trimming settings DSK downstream key Selecting the DSK typeSetting the fill matte color Selecting the DSK source signal Selecting the DSK channel and DSK fill materialDSK transitions DSK previewDSK adjustments DSK decorations Masking the DSK signals FTB fade to black Adjusting the colors Internal color signalsSetting the color background Calling the preset colorsName of signal Description of signal Switching the AUX outputSignals that can be selected by the AUX bus Selecting the AUX output materialsAUX1 transitions Setting enable/disable for the AUX1 transition Enable Enable Disable DisableMemory Memory registration and recall items Material selected Transition Pattern MenuStoring the settings in the memory Store Recalling the operations stored in the memory Recall RecallDeleting the operations stored in the memory Delete Effect dissolve Frame memories Transferring images from the AUX busSaving Images in Flash Memory SD memory cards Initializing the SD memory cards SetUp Configuration of folder at storage destinationSaving data on SD memory cards Loading data from SD memory cards Characters which can be used for filenamesDeleting files on SD memory cards Displaying the SD memory card informationInput/output signal settings Input signal settingsList of settings by input signal Setting the frame synchronizer Setting the input mode List of input modes supportedFreezing the input signals Setting freezeColor corrector Enabling the color corrector Adjusting the gain and hue of the C signal Tone curve Output levelInput level Adjusting the color matrix item gain Setting the up-converter Input imageSetting the analog input gain option Fine-tuning of image positionsSetting the analog composite input signals option DVI Input Board Digital/Analog Setting the DVI input signals optionSetting the DVI input signals Full-HD DVI Input Board DigitalAutomatic adjustment of the black level Automatic adjustment of the white levelInitializing the adjusted values 1024 768 1920 1280  720 Fit-V Fit-H1600 1200 DVI format Mode HD/1080i HD/720P1680 1050 1920 1200Adjusting the DVI input signals Input XX DVIPhs ClkPhs H-Pos −16 −100Manual Output connector Asign Setting the output signalsList of settings by output signal DownCnv DigAssigning the output signals Assigning the CLN signal DC down-converter115 116 EC edge crop Setting the down-converter optionSQ squeeze LB letter boxSetting the sync signals Adjusting the output signal phase Phase adjustment setup Input SignalsFrame synchronizer Video effectsPhase relationship between input signals and output signals For 1080/59.94i format ExampleSetting the multi view display Setting the screen layoutName of signal Display on LCD Setting the split frame and characters LUM 0%, 25%, 50%, 75%, 100%Setting the tally displays Preset type setting procedure User type setting procedureChanging the material names High-resolution multi view mode Setting the on-screen display OSD  Examples of OSD displaysSetting the ancillary data Setting the V ancillary dataSetting the embedded audio data System settings Setting the 169 squeeze modeSelecting the video format Assigning signals to the crosspoints Setting the crosspointsAssigning signals to the crosspoints Displaying the assignment statusesButton Signal Description Button SignalSetting the crosspoint switching Setting the user buttons Button assignmentsFunction name Description of function Setting method ShiftSetting the date and time Setting the dateSetting the time Setting the subnet mask Network settingsSetting the IP address Display the MAC addressMenu delegation settings Other settingsSetting the LCD backlight 60, 120Enable/Disable Setting for Control of External Devices External device controlEditor control Table of wipe patterns supportedGVG AV-HS450N Setting the GPI TALLY/GPI connector of mainframeTALLY/GPI connector of control panel Assign Item Description of function assigned Control method  Control using the GPI input port Output from the GPI output port Assign Item Description of function assigned OutputCamera control Functions that can be controlled from the unitConnection specifications AW-RP655N Connections for AW-HE100N, AW-PH405N or AW-PH360N AW-HE100N, AW-PH405N, AW-PH360N Pin No Connections for AW-PH400P AW-IF400G Switch settingsSW1 SW2 SET UP OFF AV-HS450N AW-PH400PCamera control settings CAM CTLPanTilt and Zm/Focs  For controlling the lens ZoomingOperation of F5 in the setup screen Selecting Yes/No Cameras menu operationsChanging values Alarm message displayed Type of trouble Operation Alarm status displaysAlarm message Status displaysDisplaying the version information and option information Initializing Setting Data InitializationInitializing Fader Connecting the control panel and mainframe External interfacesLAN Editor COMExample of GPI In connections Example of GPI Out and Alarm connectionsTALLY/GPI Sub 50-pin, female, inch screwSub 25-pin, female, inch screw Max. current 50 mATally LED Connections SpecificationsImage transmission functions LAN cableHow to install the software Startup Setting the IP addressOperation ExitTransmitting images to the unit Transmitting images from the unit Setting menu table ParameterPVW Reset ↓ CHR KEY ChrkeyUndo ↓ Prior Synm Sync Trim ManualLeft Top Bottom Right TrimAdj PinP2DSK1 Hue Sat Lum Load ↓DSK2 Time EnblAUX1 EFF Dslv FTBCbgd Imag B IMG B Imag a IMG aImag a Imag BCAM XPTFrame Char Label Tally MV1Frame Split Pos SignalMV1 Patt MV2 PattClear ↓ InputSDI RGBANA DVIOutput Outputyy DVI-I Shot MEM ConfigLCD-BL Menudlg Enbl SysconfGPIP-In GPIP-OutCONFIG12 CONFIG10CONFIG11 USER1 USER2 USER3System System SYSMainVer SYSSelect Version SysVer Select Board Version OptVerUnit inch mm AppearanceMainframe Control panelSpecifications  Mainframe AV-HS450U1NOption SDI outputsComposite input Analog inputDVI-D output Video delay timeDVI-D input ReferenceDimensions Temperature HumidityPower supply WeightExternal media Supplied power cord Control panel AV-HS450C1N Supplied AC adaptorAppendix glossary FTB Fade to Black Frame MemoryFreeze GenlockPreview Preset BusPreset Memory Program BusWestern Zone Panasonic Broadcast & Television Systems CompanyEastern Zone Technical Support