 LAN connector LAN RJ-45 10/100 Base-TX | Panasonic AV-HS450N

2.Functions in each area

LAN connector [LAN] (RJ-45) (10/100 Base-TX)

 For details on how to connect this connector, refer to “6. External interfaces”.

EDITOR connector [EDITOR] (RS-422, D-sub 9-pin, female, inch screw COM connector [COM] (RS-422, D-sub 9-pin, female, inch screw)

For details on how to connect this connector, refer to “6. External interfaces”.

TALLY/GPI input/output connector [TALLY/GPI] (D-sub 50-pin, female, inch screw)

 For details on how to connect this connector, refer to “6. External interfaces”.

Ground connector [SIGNAL GND]

Connect to the system’s earth ground.

AC power input socket [ IN1] [ IN2] (AC 100 V to 120 V, 50/60 Hz)

Connect one end of the supplied power cable to this socket and the other end to the AC outlet.

The supplied power cable comes with a 3-pin power plug. Be absolutely sure to plug it into a 3-point power outlet as the power source in order to earth the unit securely.

If a 3-point power outlet is not available for this connection, be absolutely sure to consult your dealer.

Cooling fan

32

Image 32

Panasonic AV-HS450N manual  LAN connector LAN RJ-45 10/100 Base-TX,  Ground connector Signal GND,  Cooling fan

Contents

Mainframe AV-HS450U1N Control panel AV-HS450C1N Safety precautions FCC Note Important Safety Instructions For USA-California Only Contents Input/output signal settings System settings 131 Features Compact design, wide variety of input/output signalsDescription Multiple formats supported High-quality chroma keys using Primatte algorithms Redundant power supplyMany different effect functions incorporated Sdhc memory cards supported Configuration AccessoriesOptional boards sold separately Board Precautions for use Trademarks and Registered Trademarks Installation Installing the control panelChoosing the best installation location Handle the control panel carefully Support guides Installing the mainframeHandle the mainframe carefully Blank panel Screw How to install the option boardsSlot a Slot B UTS INP DVI Mainframe Block diagramConnections AV-HS450N HD SDIHD SDI VTR DVI-D Example where the optional board is used DVD playerVTR HD SDI SD SDI AC adapter PC monitor  Power indicator Power  Alarm indicator AlarmFunctions in each area Control panel  PST/B bus crosspoint buttons PST/B 1 to Crosspoint area PGM/A bus crosspoint buttons PGM/A 1 to  Pattern page indicator LEDs Wipe pattern/memory area AUX bus crosspoint buttons  Wipe pattern and memory selector buttons User button area Transition area  MIX button  Wipe button Auto button  CUT button  Bus tally LEDs  Wipe direction selection buttons Wipe Direction N/R, R Fader lever LCD menu area List of menu delegation functions  Menu function buttons Menu FUNCTION/AUX BUS Delegation  Rotary encoders F1 to F5 Hold button Basic menu operations Positioner area  Positioner X/Y Rotary encoder Z Wipe Bkgd  SD memory card access LED SD memory card areaSD memory card slot SD memory cards Rear panel connections area  Power switch POWER1, POWER2  Power indicator POWER1, POWER2 Alarm indicator ALARM1, ALARM2 Mainframe  SDI signal input connectors SDI Inputs 1 to  SDI signal output connectors SDI Outputs 1 to DVI-D output connectors DVI-D Outputs 5  Reference input connector/BB output connector REF  LAN connector LAN RJ-45 10/100 Base-TX  Ground connector Signal GNDAC power input socket IN1 IN2 AC 100 V to 120 V, 50/60 Hz  Cooling fan Selecting the bus using the Shift function Basic operationsBackground transition Selecting the bus All Shift Single Shift Allocating the Shift function Menu display Basic operations Selecting the bus mode PGM PGM/A PGM/A, PST/B PVW PST Selecting the transition mode Manual transition using the fader leverAuto transition Cut transition Setting the Image effects Image Executing the Image effect How to select the wipe patterns WipeSelecting the wipe pattern  Table of wipe patterns SL SL SQ2 squeezeSQ SQ Selecting the background for the 3D2 pattern Selecting the wipe direction Setting the border and soft effect Setting the border color To call the preset color Wipe decorations border, soft effect Setting the wipe start position Pos, Y-Pos setting range Setting the lighting effect Modifying wipe For background transitions  For key transitions Setting the trimming Key Selecting the key type Lum luminance key/self keyLinear linear key/EXT key Chroma chroma key/self key Selecting the key fill signal Selecting the key source signal Setting with AUX bus crosspoint buttons  Setting in the Config menu Key transitions Pattern examples Key preview Key auto transition Adjusting the luminance key and linear key Operation Parameter Description of setting Setting range  To execute the sampling manually Adjusting the chroma keyStep  To execute the sampling automatically Step Sample1 Matte Cln.FG Sample1 CmpsitSpl.Spg Chrkey 3 View Mode Matte Spill- Spill+Spill Matte- Matte+ Detail- Detail+ Detail MatSpngMkFGTrn RstrDtl FineTun Key decorations Setting the key edgeSetting the edge color Masking the key signals Turn F2 to F5 to set the area to be masked PinP combinations using the flying key Flying key PinP picture in picture Selecting the PinP channel and material Selecting Shape PinP preview PinP transitions PinP adjustmentsAdjusting the PinP position and size Adjusting the rotation angle Select the dot by dot mode Linking PinP1 and PinP2 Setting the priorityLinking PinP1 and PinP2 PinP decorations Trimming settings DSK downstream key Selecting the DSK type Setting the fill matte color Selecting the DSK source signal Selecting the DSK channel and DSK fill material DSK transitions DSK preview DSK adjustments DSK decorations Masking the DSK signals FTB fade to black Internal color signals Setting the color backgroundAdjusting the colors Calling the preset colors Switching the AUX output Signals that can be selected by the AUX busName of signal Description of signal Selecting the AUX output materials AUX1 transitions Setting enable/disable for the AUX1 transition Enable Enable Disable Disable Memory Memory registration and recall items Material selected Transition Pattern Menu Storing the settings in the memory Store Recalling the operations stored in the memory Recall Recall Deleting the operations stored in the memory Delete Effect dissolve Frame memories Transferring images from the AUX bus Saving Images in Flash Memory SD memory cards Initializing the SD memory cards Saving data on SD memory cards SetUpConfiguration of folder at storage destination Loading data from SD memory cards Characters which can be used for filenames Deleting files on SD memory cards Displaying the SD memory card information List of settings by input signal Input/output signal settingsInput signal settings Setting the frame synchronizer Setting the input mode List of input modes supported Freezing the input signals Setting freeze Color corrector Enabling the color corrector  Adjusting the gain and hue of the C signal Input level Tone curveOutput level Adjusting the color matrix item gain Setting the up-converter Input image Setting the analog input gain option Fine-tuning of image positions Setting the analog composite input signals option Setting the DVI input signals option Setting the DVI input signalsDVI Input Board Digital/Analog Full-HD DVI Input Board Digital Initializing the adjusted values Automatic adjustment of the black levelAutomatic adjustment of the white level 1920 1280  720  Fit-V1024 768 Fit-H DVI format Mode HD/1080i HD/720P 1680 10501600 1200 1920 1200 Adjusting the DVI input signals Input XX DVIPhs ClkPhs H-Pos −16 −100 Setting the output signals List of settings by output signalManual Output connector Asign DownCnv Dig Assigning the output signals Assigning the CLN signal DC down-converter 115 116 Setting the down-converter option SQ squeezeEC edge crop LB letter box Setting the sync signals Adjusting the output signal phase Phase adjustment setup Signals Frame synchronizerInput Video effects Phase relationship between input signals and output signals For 1080/59.94i format Example Setting the multi view display Setting the screen layout Name of signal Display on LCD Setting the split frame and characters LUM 0%, 25%, 50%, 75%, 100% Setting the tally displays Changing the material names Preset type setting procedureUser type setting procedure High-resolution multi view mode Setting the on-screen display OSD  Examples of OSD displays Setting the embedded audio data Setting the ancillary dataSetting the V ancillary data Selecting the video format System settingsSetting the 169 squeeze mode Setting the crosspoints Assigning signals to the crosspointsAssigning signals to the crosspoints Displaying the assignment statuses Button Signal Description Button Signal Setting the crosspoint switching Function name Description of function Setting the user buttonsButton assignments Setting method Shift Setting the time Setting the date and timeSetting the date Network settings Setting the IP addressSetting the subnet mask Display the MAC address Other settings Setting the LCD backlightMenu delegation settings 60, 120 Enable/Disable Setting for Control of External Devices External device control GVG AV-HS450N Editor controlTable of wipe patterns supported TALLY/GPI connector of control panel Setting the GPITALLY/GPI connector of mainframe  Control using the GPI input port  Output from the GPI output portAssign Item Description of function assigned Control method Assign Item Description of function assigned Output Camera control Functions that can be controlled from the unit Connection specifications AW-RP655N  Connections for AW-HE100N, AW-PH405N or AW-PH360N AW-HE100N, AW-PH405N, AW-PH360N Pin No AW-IF400G Switch settings SW1 SW2 SET UP OFF Connections for AW-PH400P AV-HS450N AW-PH400P Camera control settings CAM CTL PanTilt and Zm/Focs  For controlling the lens Zooming Changing values Operation of F5 in the setup screen Selecting Yes/NoCameras menu operations Alarm status displays Alarm messageAlarm message displayed Type of trouble Operation Status displays Displaying the version information and option information Initializing Fader Initializing Setting DataInitialization LAN Connecting the control panel and mainframeExternal interfaces Editor COM Example of GPI Out and Alarm connections TALLY/GPIExample of GPI In connections Sub 50-pin, female, inch screw Tally LED Sub 25-pin, female, inch screwMax. current 50 mA Specifications Image transmission functionsConnections LAN cable How to install the software Setting the IP address OperationStartup Exit Transmitting images to the unit Transmitting images from the unit PVW Setting menu tableParameter Undo ↓ Reset ↓CHR KEY Chrkey Trim Manual Left Top Bottom Right TrimAdjPrior Synm Sync PinP2 DSK2 DSK1Hue Sat Lum Load ↓ AUX1 TimeEnbl Cbgd EFF DslvFTB Imag a IMG a Imag aImag B IMG B Imag B CAM XPT Split Pos Signal MV1 PattFrame Char Label Tally MV1Frame MV2 Patt Input SDIClear ↓ RGB ANA DVI Output Outputyy DVI-I Config LCD-BL MenudlgShot MEM Enbl Sysconf GPIP-In GPIP-Out CONFIG10 CONFIG11CONFIG12 USER1 USER2 USER3 System System SYS SYS Select Version SysVerMainVer Select Board Version OptVer Appearance MainframeUnit inch mm Control panel Specifications  Mainframe AV-HS450U1N SDI outputs Composite inputOption Analog input Video delay time DVI-D inputDVI-D output Reference Temperature Humidity Power supplyDimensions Weight Supplied power cord  Control panel AV-HS450C1NExternal media Supplied AC adaptor Appendix glossary Frame Memory FreezeFTB Fade to Black Genlock Preset Bus Preset MemoryPreview Program Bus Panasonic Broadcast & Television Systems Company Eastern ZoneWestern Zone Technical Support