Panasonic AV-HS450N Positioner area,  Positioner X/Y,  Rotary encoder Z, Wipe Bkgd, Wipe KEY

2. Functions in each area

2-1-6.Positioner area

Positioner [X/Y]

These are used when performing the settings below.

PinP1, PinP2 position settings

Wipe start position setting (WIPE #5, WIPE #11, SQ #5)

Camera control

Flying key position setting

Chroma key marker position setting



Z



POSITIONER

In each case, the settings take effect only when the following menu items have been selected.

Note

The center values of the positioner are set during the time it takes for the unit to start up after its power is turned on. Do not operate the positioner until after the switcher has started up.

Rotary encoder [Z]

This is used to set the PinP size, flying key size or to select the chroma key area.

In each case, the settings take effect only when the following menu items have been selected.

	Positioner	Rotary encoder		Valid menu
	X/Y	Z	Switch
PinP1, PinP2	Position adjustments	Size adjustments	Hold switch down to	All PinP1 and PinP2
		(size increased by rotating	restore initial values	menus (except for
		the encoder clockwise	(X/Y, Z).	PinP1, PinP2/Rotation)
		and reduced by rotating it
		counterclockwise)
	Rotation angle	Rotation angle	Hold switch down to	PinP1, PinP2/
	adjustments	adjustments	restore initial values	Rotation
	(X-direction and	(Z-direction rotation)	(X/Y, Z).
	Y-direction rotation)
WIPE (BKGD)	Start position	—	Hold switch down to	BKGD/WIPEPos
	adjustments		restore initial values	BKGD/SQPos
			(X/Y).
WIPE (KEY)	Start position	—	Hold switch down to	KEY/WIPEPos
	adjustments		restore initial values	KEY/SQPos
			(X/Y).
Chroma key	Selection position	Selected area size	Execute sampling	CHR KEY/Sample1
	adjustments	adjustments		CHR KEY/Sample2
		(size increased by rotating
		the encoder clockwise
		and reduced by rotating it
		counterclockwise)
Flying key	Position adjustments	Size adjustments	Hold switch down to	KEY/FlyKEY
		(size increased by rotating	restore initial values
		the encoder clockwise	(X/Y, Z).
		and reduced by rotating it
		counterclockwise)
Camera control	X: Pan control or focus	—	Switching between	All menus other than
	control		pan/tilt control and	those listed above
	Y: Tilt control or zoom		zoom/focus control
	control

27