Setting the frame synchronizer | Panasonic AV-HS450N specification

4. Input/output signal settings

4-1-1. Setting the frame synchronizer

The frame synchronizer can be set to On or Off for each input.

The DVI input (option) frame synchronizer is permanently On. It cannot be set from On to Off or vice versa.

Press the [INPUT] button to light its indicator and display the INPUT menu.

Refer to “2-1-5. LCD menu area”.

Turn [F1] to display the INPUT XX sub menu. (X: IN1 to IN16, A1, A2, B1 or B2)

The input used to set the frame synchronizer function is selected for X. Turn [F2] to display the third menu of FS.

<Menu display>

INPUT XXFS	FS			Mode↓ CC
	1/13		OnNormal				Off

			Off		DbyD		On
					UC
					Auto

Turn [F3] to set On or Off for the frame synchronizer using the FS item.

If the output signal phase is set to 0H, Off cannot be selected as the FS item setting.

AVDL function is active while the frame synchronizer function is set to Off.

The AVDL function automatically adjusts the input image signal phase to the horizontal synchronization reference signal phase.

For details, refer to “4-7. Adjusting the output signal phase”.

97

Image 97

Panasonic AV-HS450N manual Setting the frame synchronizer

Contents

Control panel AV-HS450C1N Mainframe AV-HS450U1N FCC Note Safety precautions For USA-California Only Important Safety Instructions Contents Input/output signal settings System settings 131 Compact design, wide variety of input/output signals FeaturesDescription Multiple formats supported Redundant power supply High-quality chroma keys using Primatte algorithmsMany different effect functions incorporated Sdhc memory cards supported Accessories ConfigurationOptional boards sold separately Board Precautions for use Trademarks and Registered Trademarks Installing the control panel InstallationChoosing the best installation location Handle the control panel carefully Handle the mainframe carefully Installing the mainframeSupport guides Slot a Slot B How to install the option boardsBlank panel Screw UTS INP DVI Connections Block diagramMainframe HD SDI AV-HS450NHD SDI VTR DVI-D DVD player Example where the optional board is usedVTR HD SDI SD SDI AC adapter PC monitor  Alarm indicator Alarm  Power indicator PowerFunctions in each area Control panel  PGM/A bus crosspoint buttons PGM/A 1 to Crosspoint area PST/B bus crosspoint buttons PST/B 1 to Wipe pattern/memory area  Pattern page indicator LEDs AUX bus crosspoint buttons  Wipe pattern and memory selector buttons Transition area User button area  Wipe button  MIX button Auto button  CUT button  Fader lever  Wipe direction selection buttons Wipe Direction N/R, R Bus tally LEDs List of menu delegation functions LCD menu area  Rotary encoders F1 to F5  Menu function buttons Menu FUNCTION/AUX BUS Delegation Hold button Basic menu operations  Positioner X/Y Positioner area Rotary encoder Z Wipe Bkgd SD memory card area  SD memory card access LEDSD memory card slot SD memory cards Rear panel connections area  Power indicator POWER1, POWER2  Power switch POWER1, POWER2 Alarm indicator ALARM1, ALARM2 Mainframe  SDI signal output connectors SDI Outputs 1 to  SDI signal input connectors SDI Inputs 1 to DVI-D output connectors DVI-D Outputs 5  Reference input connector/BB output connector REF  Ground connector Signal GND  LAN connector LAN RJ-45 10/100 Base-TXAC power input socket IN1 IN2 AC 100 V to 120 V, 50/60 Hz  Cooling fan Basic operations Selecting the bus using the Shift functionBackground transition Selecting the bus Single Shift All Shift Allocating the Shift function Menu display Basic operations PGM PGM/A PGM/A, PST/B PVW PST Selecting the bus mode Manual transition using the fader lever Selecting the transition modeAuto transition Cut transition Image Setting the Image effects Executing the Image effect Wipe How to select the wipe patternsSelecting the wipe pattern  Table of wipe patterns SQ SQ SQ2 squeezeSL SL Selecting the wipe direction Selecting the background for the 3D2 pattern Setting the border color Setting the border and soft effect To call the preset color Wipe decorations border, soft effect Pos, Y-Pos setting range Setting the wipe start position Modifying wipe Setting the lighting effect For background transitions  For key transitions Setting the trimming Key Lum luminance key/self key Selecting the key typeLinear linear key/EXT key Chroma chroma key/self key Selecting the key source signal Selecting the key fill signal Setting with AUX bus crosspoint buttons  Setting in the Config menu Pattern examples Key transitions Key auto transition Key preview Operation Parameter Description of setting Setting range Adjusting the luminance key and linear key Step  To execute the sampling automatically Adjusting the chroma key To execute the sampling manually Step Sample1 Matte Cln.FG Sample1 CmpsitSpl.Spg Chrkey 3 View Mode Spill Matte- Matte+ Spill- Spill+Matte Detail MatSpng Detail- Detail+MkFGTrn RstrDtl FineTun Setting the edge color Setting the key edgeKey decorations Turn F2 to F5 to set the area to be masked Masking the key signals Flying key PinP combinations using the flying key Selecting the PinP channel and material PinP picture in picture PinP preview Selecting Shape Adjusting the PinP position and size PinP adjustmentsPinP transitions Select the dot by dot mode Adjusting the rotation angle Linking PinP1 and PinP2 Setting the priorityLinking PinP1 and PinP2 PinP decorations Trimming settings Selecting the DSK type DSK downstream key Setting the fill matte color Selecting the DSK channel and DSK fill material Selecting the DSK source signal DSK preview DSK transitions DSK adjustments DSK decorations Masking the DSK signals FTB fade to black Setting the color background Internal color signalsAdjusting the colors Calling the preset colors Signals that can be selected by the AUX bus Switching the AUX outputName of signal Description of signal Selecting the AUX output materials AUX1 transitions Enable Enable Disable Disable Setting enable/disable for the AUX1 transition Memory Material selected Transition Pattern Menu Memory registration and recall items Storing the settings in the memory Store Recall Recalling the operations stored in the memory Recall Deleting the operations stored in the memory Delete Effect dissolve Transferring images from the AUX bus Frame memories Saving Images in Flash Memory SD memory cards Initializing the SD memory cards Configuration of folder at storage destination SetUpSaving data on SD memory cards Characters which can be used for filenames Loading data from SD memory cards Displaying the SD memory card information Deleting files on SD memory cards Input signal settings Input/output signal settingsList of settings by input signal Setting the frame synchronizer List of input modes supported Setting the input mode Setting freeze Freezing the input signals Enabling the color corrector Color corrector  Adjusting the gain and hue of the C signal Output level Tone curveInput level Adjusting the color matrix item gain Input image Setting the up-converter Fine-tuning of image positions Setting the analog input gain option Setting the analog composite input signals option Setting the DVI input signals Setting the DVI input signals optionDVI Input Board Digital/Analog Full-HD DVI Input Board Digital Automatic adjustment of the white level Automatic adjustment of the black levelInitializing the adjusted values Fit-V 1920 1280  720 1024 768 Fit-H 1680 1050 DVI format Mode HD/1080i HD/720P1600 1200 1920 1200 Input XX DVIPhs ClkPhs H-Pos −16 −100 Adjusting the DVI input signals List of settings by output signal Setting the output signalsManual Output connector Asign DownCnv Dig Assigning the output signals DC down-converter Assigning the CLN signal 115 116 SQ squeeze Setting the down-converter optionEC edge crop LB letter box Setting the sync signals Adjusting the output signal phase Phase adjustment setup Frame synchronizer SignalsInput Video effects For 1080/59.94i format Example Phase relationship between input signals and output signals Setting the screen layout Setting the multi view display Name of signal Display on LCD LUM 0%, 25%, 50%, 75%, 100% Setting the split frame and characters Setting the tally displays User type setting procedure Preset type setting procedureChanging the material names High-resolution multi view mode  Examples of OSD displays Setting the on-screen display OSD Setting the V ancillary data Setting the ancillary dataSetting the embedded audio data Setting the 169 squeeze mode System settingsSelecting the video format Assigning signals to the crosspoints Setting the crosspointsAssigning signals to the crosspoints Displaying the assignment statuses Button Signal Button Signal Description Setting the crosspoint switching Button assignments Setting the user buttonsFunction name Description of function Shift Setting method Setting the date Setting the date and timeSetting the time Setting the IP address Network settingsSetting the subnet mask Display the MAC address Setting the LCD backlight Other settingsMenu delegation settings 60, 120 External device control Enable/Disable Setting for Control of External Devices Table of wipe patterns supported Editor controlGVG AV-HS450N TALLY/GPI connector of mainframe Setting the GPITALLY/GPI connector of control panel  Output from the GPI output port  Control using the GPI input portAssign Item Description of function assigned Control method Assign Item Description of function assigned Output Functions that can be controlled from the unit Camera control AW-RP655N Connection specifications AW-HE100N, AW-PH405N, AW-PH360N Pin No  Connections for AW-HE100N, AW-PH405N or AW-PH360N SW1 SW2 SET UP OFF AW-IF400G Switch settings Connections for AW-PH400P AV-HS450N AW-PH400P CAM CTL Camera control settings  For controlling the lens Zooming PanTilt and Zm/Focs Cameras menu operations Operation of F5 in the setup screen Selecting Yes/NoChanging values Alarm message Alarm status displaysAlarm message displayed Type of trouble Operation Status displays Displaying the version information and option information Initialization Initializing Setting DataInitializing Fader External interfaces Connecting the control panel and mainframeLAN COM Editor TALLY/GPI Example of GPI Out and Alarm connectionsExample of GPI In connections Sub 50-pin, female, inch screw Max. current 50 mA Sub 25-pin, female, inch screwTally LED Image transmission functions SpecificationsConnections LAN cable How to install the software Operation Setting the IP addressStartup Exit Transmitting images to the unit Transmitting images from the unit Parameter Setting menu tablePVW CHR KEY Chrkey Reset ↓Undo ↓ Left Top Bottom Right TrimAdj Trim ManualPrior Synm Sync PinP2 Hue Sat Lum Load ↓ DSK1DSK2 Enbl TimeAUX1 FTB EFF DslvCbgd Imag a Imag a IMG aImag B IMG B Imag B XPT CAM MV1 Patt Split Pos SignalFrame Char Label Tally MV1Frame MV2 Patt SDI InputClear ↓ RGB DVI ANA Output Outputyy DVI-I LCD-BL Menudlg ConfigShot MEM Enbl Sysconf GPIP-Out GPIP-In CONFIG11 CONFIG10CONFIG12 USER1 USER2 USER3 System SYS System Select Version SysVer SYSMainVer Select Board Version OptVer Mainframe AppearanceUnit inch mm Control panel  Mainframe AV-HS450U1N Specifications Composite input SDI outputsOption Analog input DVI-D input Video delay timeDVI-D output Reference Power supply Temperature HumidityDimensions Weight  Control panel AV-HS450C1N Supplied power cordExternal media Supplied AC adaptor Appendix glossary Freeze Frame MemoryFTB Fade to Black Genlock Preset Memory Preset BusPreview Program Bus Eastern Zone Panasonic Broadcast & Television Systems CompanyWestern Zone Technical Support