DC down-converter, Assigning the CLN signal | Panasonic AV-HS450N

4. Input/output signal settings

When the SDI output board (option) has been connected, turn [F4] to set the output mode using the Mode item, and press the [F4] switch to enter the setting.

An asterisk () appears on the left of the currently selected output mode.

Normal: The same signals as the system format signals are output.

DC (down-converter):

When the system format is 1080/59.94i or 720/59.94p, the signals are output in the 480/59.94i format.

When the system format is 1080/50i or 720/50p, the signals are output in the 576/50i format. When the system format is SD (480/59.94i or 576/50i), this setting cannot be selected.

Assigning the CLN signal

Set KEYCLN, DSK1CLN or DSK2CLN as the CLN output.

Press the [CONFIG] button to light its indicator and display the CONFIG menu.

Refer to “2-1-5. LCD menu area”.

Turn [F1] to display the CLNAsign sub menu.

<Menu display>

CONFIG12		CLN
CLNAsign		KEY

		DSK1
		DSK2

Turn [F2] to select the type of output signal using the CLN item.

114

Image 114

Panasonic AV-HS450N manual DC down-converter, Assigning the CLN signal

Contents

Mainframe AV-HS450U1N Control panel AV-HS450C1N Safety precautions FCC Note Important Safety Instructions For USA-California Only Contents Input/output signal settings System settings 131 Description FeaturesCompact design, wide variety of input/output signals Multiple formats supported Many different effect functions incorporated High-quality chroma keys using Primatte algorithmsRedundant power supply Sdhc memory cards supported Optional boards sold separately ConfigurationAccessories Board Precautions for use Trademarks and Registered Trademarks Choosing the best installation location InstallationInstalling the control panel Handle the control panel carefully Installing the mainframe Handle the mainframe carefullySupport guides How to install the option boards Slot a Slot BBlank panel Screw UTS INP DVI Block diagram ConnectionsMainframe HD SDI VTR AV-HS450NHD SDI DVI-D VTR HD SDI SD SDI Example where the optional board is usedDVD player AC adapter PC monitor Functions in each area  Power indicator Power Alarm indicator Alarm Control panel Crosspoint area  PGM/A bus crosspoint buttons PGM/A 1 to PST/B bus crosspoint buttons PST/B 1 to  AUX bus crosspoint buttons  Pattern page indicator LEDsWipe pattern/memory area  Wipe pattern and memory selector buttons User button area Transition area  Auto button  MIX button Wipe button  CUT button  Wipe direction selection buttons Wipe Direction N/R, R  Fader lever Bus tally LEDs LCD menu area List of menu delegation functions  Hold button  Menu function buttons Menu FUNCTION/AUX BUS Delegation Rotary encoders F1 to F5 Basic menu operations  Rotary encoder Z Positioner area Positioner X/Y Wipe Bkgd SD memory card slot  SD memory card access LEDSD memory card area SD memory cards Rear panel connections area  Alarm indicator ALARM1, ALARM2  Power switch POWER1, POWER2 Power indicator POWER1, POWER2 Mainframe  DVI-D output connectors DVI-D Outputs 5  SDI signal input connectors SDI Inputs 1 to SDI signal output connectors SDI Outputs 1 to  Reference input connector/BB output connector REF AC power input socket IN1 IN2 AC 100 V to 120 V, 50/60 Hz  LAN connector LAN RJ-45 10/100 Base-TX Ground connector Signal GND  Cooling fan Background transition Selecting the bus using the Shift functionBasic operations Selecting the bus  Allocating the Shift function All ShiftSingle Shift Menu display Basic operations Selecting the bus mode PGM PGM/A PGM/A, PST/B PVW PST Auto transition Selecting the transition modeManual transition using the fader lever Cut transition Setting the Image effects Image Executing the Image effect Selecting the wipe pattern How to select the wipe patternsWipe  Table of wipe patterns SQ2 squeeze SQ SQSL SL Selecting the background for the 3D2 pattern Selecting the wipe direction  To call the preset color Setting the border and soft effectSetting the border color Wipe decorations border, soft effect Setting the wipe start position Pos, Y-Pos setting range  For background transitions Setting the lighting effectModifying wipe  For key transitions Setting the trimming Key Linear linear key/EXT key Selecting the key typeLum luminance key/self key Chroma chroma key/self key  Setting with AUX bus crosspoint buttons Selecting the key fill signalSelecting the key source signal  Setting in the Config menu Key transitions Pattern examples Key preview Key auto transition Adjusting the luminance key and linear key Operation Parameter Description of setting Setting range Adjusting the chroma key Step  To execute the sampling automatically To execute the sampling manually Step Sample1 Matte Cln.FG Sample1 CmpsitSpl.Spg Chrkey 3 View Mode Spill- Spill+ Spill Matte- Matte+Matte MkFGTrn Detail- Detail+Detail MatSpng RstrDtl FineTun Setting the key edge Setting the edge colorKey decorations Masking the key signals Turn F2 to F5 to set the area to be masked PinP combinations using the flying key Flying key PinP picture in picture Selecting the PinP channel and material Selecting Shape PinP preview PinP adjustments Adjusting the PinP position and sizePinP transitions Adjusting the rotation angle Select the dot by dot mode Setting the priority Linking PinP1 and PinP2Linking PinP1 and PinP2 PinP decorations Trimming settings DSK downstream key Selecting the DSK type Setting the fill matte color Selecting the DSK source signal Selecting the DSK channel and DSK fill material DSK transitions DSK preview DSK adjustments DSK decorations Masking the DSK signals FTB fade to black Adjusting the colors Internal color signalsSetting the color background Calling the preset colors Name of signal Description of signal Switching the AUX outputSignals that can be selected by the AUX bus Selecting the AUX output materials AUX1 transitions Setting enable/disable for the AUX1 transition Enable Enable Disable Disable Memory Memory registration and recall items Material selected Transition Pattern Menu Storing the settings in the memory Store Recalling the operations stored in the memory Recall Recall Deleting the operations stored in the memory Delete Effect dissolve Frame memories Transferring images from the AUX bus Saving Images in Flash Memory SD memory cards Initializing the SD memory cards SetUp Configuration of folder at storage destinationSaving data on SD memory cards Loading data from SD memory cards Characters which can be used for filenames Deleting files on SD memory cards Displaying the SD memory card information Input/output signal settings Input signal settingsList of settings by input signal Setting the frame synchronizer Setting the input mode List of input modes supported Freezing the input signals Setting freeze Color corrector Enabling the color corrector  Adjusting the gain and hue of the C signal Tone curve Output levelInput level Adjusting the color matrix item gain Setting the up-converter Input image Setting the analog input gain option Fine-tuning of image positions Setting the analog composite input signals option DVI Input Board Digital/Analog Setting the DVI input signals optionSetting the DVI input signals Full-HD DVI Input Board Digital Automatic adjustment of the black level Automatic adjustment of the white levelInitializing the adjusted values 1024 768 1920 1280  720 Fit-V Fit-H 1600 1200 DVI format Mode HD/1080i HD/720P1680 1050 1920 1200 Adjusting the DVI input signals Input XX DVIPhs ClkPhs H-Pos −16 −100 Manual Output connector Asign Setting the output signalsList of settings by output signal DownCnv Dig Assigning the output signals Assigning the CLN signal DC down-converter 115 116 EC edge crop Setting the down-converter optionSQ squeeze LB letter box Setting the sync signals Adjusting the output signal phase Phase adjustment setup Input SignalsFrame synchronizer Video effects Phase relationship between input signals and output signals For 1080/59.94i format Example Setting the multi view display Setting the screen layout Name of signal Display on LCD Setting the split frame and characters LUM 0%, 25%, 50%, 75%, 100% Setting the tally displays Preset type setting procedure User type setting procedureChanging the material names High-resolution multi view mode Setting the on-screen display OSD  Examples of OSD displays Setting the ancillary data Setting the V ancillary dataSetting the embedded audio data System settings Setting the 169 squeeze modeSelecting the video format Assigning signals to the crosspoints Setting the crosspointsAssigning signals to the crosspoints Displaying the assignment statuses Button Signal Description Button Signal Setting the crosspoint switching Setting the user buttons Button assignmentsFunction name Description of function Setting method Shift Setting the date and time Setting the dateSetting the time Setting the subnet mask Network settingsSetting the IP address Display the MAC address Menu delegation settings Other settingsSetting the LCD backlight 60, 120 Enable/Disable Setting for Control of External Devices External device control Editor control Table of wipe patterns supportedGVG AV-HS450N Setting the GPI TALLY/GPI connector of mainframeTALLY/GPI connector of control panel Assign Item Description of function assigned Control method  Control using the GPI input port Output from the GPI output port Assign Item Description of function assigned Output Camera control Functions that can be controlled from the unit Connection specifications AW-RP655N  Connections for AW-HE100N, AW-PH405N or AW-PH360N AW-HE100N, AW-PH405N, AW-PH360N Pin No  Connections for AW-PH400P AW-IF400G Switch settingsSW1 SW2 SET UP OFF AV-HS450N AW-PH400P Camera control settings CAM CTL PanTilt and Zm/Focs  For controlling the lens Zooming Operation of F5 in the setup screen Selecting Yes/No Cameras menu operationsChanging values Alarm message displayed Type of trouble Operation Alarm status displaysAlarm message Status displays Displaying the version information and option information Initializing Setting Data InitializationInitializing Fader Connecting the control panel and mainframe External interfacesLAN Editor COM Example of GPI In connections Example of GPI Out and Alarm connectionsTALLY/GPI Sub 50-pin, female, inch screw Sub 25-pin, female, inch screw Max. current 50 mATally LED Connections SpecificationsImage transmission functions LAN cable How to install the software Startup Setting the IP addressOperation Exit Transmitting images to the unit Transmitting images from the unit Setting menu table ParameterPVW Reset ↓ CHR KEY ChrkeyUndo ↓ Prior Synm Sync Trim ManualLeft Top Bottom Right TrimAdj PinP2 DSK1 Hue Sat Lum Load ↓DSK2 Time EnblAUX1 EFF Dslv FTBCbgd Imag B IMG B Imag a IMG aImag a Imag B CAM XPT Frame Char Label Tally MV1Frame Split Pos SignalMV1 Patt MV2 Patt Clear ↓ InputSDI RGB ANA DVI Output Outputyy DVI-I Shot MEM ConfigLCD-BL Menudlg Enbl Sysconf GPIP-In GPIP-Out CONFIG12 CONFIG10CONFIG11 USER1 USER2 USER3 System System SYS MainVer SYSSelect Version SysVer Select Board Version OptVer Unit inch mm AppearanceMainframe Control panel Specifications  Mainframe AV-HS450U1N Option SDI outputsComposite input Analog input DVI-D output Video delay timeDVI-D input Reference Dimensions Temperature HumidityPower supply Weight External media Supplied power cord Control panel AV-HS450C1N Supplied AC adaptor Appendix glossary FTB Fade to Black Frame MemoryFreeze Genlock Preview Preset BusPreset Memory Program Bus Western Zone Panasonic Broadcast & Television Systems CompanyEastern Zone Technical Support