Setting the on-screen display OSD | Panasonic AV-HS450N guide

MV1

MV2

MV1+MV2

4. Input/output signal settings

4-9. Setting the on-screen display (OSD)

The menu screen can be superimposed onto the preview output or multi view display 1 or 2 output for display.

	Press the [CONFIG] button to light its indicator and	<Menu display>
	display the CONFIG menu.	CONFIG10OSD		Select
		OSD		On	PVW

Turn [F1] to display the OSD sub menu.

Turn [F2] to set whether to display the OSD usingOff the OSD item.

On: OSD is displayed.

Off: OSD is not displayed.

This function can be assigned to a user button.  See “5-3-1. Setting the user buttons”.

Turn [F3] to set the output destination using the Select item.

PVW: The menu screen is superimposed onto the preview output, and output.

MV1: The menu screen is superimposed onto multi view display output 1, and output.

MV2: The menu screen is superimposed onto multi view display output 2, and output.

MV1+2: The menu screen is superimposed onto both multi view display outputs 1 and 2, and output.

When On is selected as the OSD item setting, the multi view display split frame are not displayed on the monitor.

Examples of OSD displays

“>” appears to the left of the selected menu.

This indicates the wipe pattern for the background transition.

This indicates the wipe pattern for the key transition.

129

Image 129

Panasonic AV-HS450N manual Setting the on-screen display OSD,  Examples of OSD displays

Contents

Control panel AV-HS450C1N Mainframe AV-HS450U1N FCC Note Safety precautions For USA-California Only Important Safety Instructions Contents Input/output signal settings System settings 131 Compact design, wide variety of input/output signals FeaturesDescription Multiple formats supported Redundant power supply High-quality chroma keys using Primatte algorithmsMany different effect functions incorporated Sdhc memory cards supported Accessories ConfigurationOptional boards sold separately Board Precautions for use Trademarks and Registered Trademarks Installing the control panel InstallationChoosing the best installation location Handle the control panel carefully Installing the mainframe Handle the mainframe carefullySupport guides How to install the option boards Slot a Slot BBlank panel Screw UTS INP DVI Block diagram ConnectionsMainframe HD SDI AV-HS450NHD SDI VTR DVI-D DVD player Example where the optional board is usedVTR HD SDI SD SDI AC adapter PC monitor  Alarm indicator Alarm  Power indicator PowerFunctions in each area Control panel Crosspoint area  PGM/A bus crosspoint buttons PGM/A 1 to PST/B bus crosspoint buttons PST/B 1 to Wipe pattern/memory area  Pattern page indicator LEDs AUX bus crosspoint buttons  Wipe pattern and memory selector buttons Transition area User button area  Wipe button  MIX button Auto button  CUT button  Wipe direction selection buttons Wipe Direction N/R, R  Fader lever Bus tally LEDs List of menu delegation functions LCD menu area  Rotary encoders F1 to F5  Menu function buttons Menu FUNCTION/AUX BUS Delegation Hold button Basic menu operations  Positioner X/Y Positioner area Rotary encoder Z Wipe Bkgd SD memory card area  SD memory card access LEDSD memory card slot SD memory cards Rear panel connections area  Power indicator POWER1, POWER2  Power switch POWER1, POWER2 Alarm indicator ALARM1, ALARM2 Mainframe  SDI signal output connectors SDI Outputs 1 to  SDI signal input connectors SDI Inputs 1 to DVI-D output connectors DVI-D Outputs 5  Reference input connector/BB output connector REF  Ground connector Signal GND  LAN connector LAN RJ-45 10/100 Base-TXAC power input socket IN1 IN2 AC 100 V to 120 V, 50/60 Hz  Cooling fan Basic operations Selecting the bus using the Shift functionBackground transition Selecting the bus Single Shift All Shift Allocating the Shift function Menu display Basic operations PGM PGM/A PGM/A, PST/B PVW PST Selecting the bus mode Manual transition using the fader lever Selecting the transition modeAuto transition Cut transition Image Setting the Image effects Executing the Image effect Wipe How to select the wipe patternsSelecting the wipe pattern  Table of wipe patterns SQ2 squeeze SQ SQSL SL Selecting the wipe direction Selecting the background for the 3D2 pattern Setting the border color Setting the border and soft effect To call the preset color Wipe decorations border, soft effect Pos, Y-Pos setting range Setting the wipe start position Modifying wipe Setting the lighting effect For background transitions  For key transitions Setting the trimming Key Lum luminance key/self key Selecting the key typeLinear linear key/EXT key Chroma chroma key/self key Selecting the key source signal Selecting the key fill signal Setting with AUX bus crosspoint buttons  Setting in the Config menu Pattern examples Key transitions Key auto transition Key preview Operation Parameter Description of setting Setting range Adjusting the luminance key and linear key Adjusting the chroma key Step  To execute the sampling automatically To execute the sampling manually Step Sample1 Matte Cln.FG Sample1 CmpsitSpl.Spg Chrkey 3 View Mode Spill- Spill+ Spill Matte- Matte+Matte Detail MatSpng Detail- Detail+MkFGTrn RstrDtl FineTun Setting the key edge Setting the edge colorKey decorations Turn F2 to F5 to set the area to be masked Masking the key signals Flying key PinP combinations using the flying key Selecting the PinP channel and material PinP picture in picture PinP preview Selecting Shape PinP adjustments Adjusting the PinP position and sizePinP transitions Select the dot by dot mode Adjusting the rotation angle Setting the priority Linking PinP1 and PinP2Linking PinP1 and PinP2 PinP decorations Trimming settings Selecting the DSK type DSK downstream key Setting the fill matte color Selecting the DSK channel and DSK fill material Selecting the DSK source signal DSK preview DSK transitions DSK adjustments DSK decorations Masking the DSK signals FTB fade to black Setting the color background Internal color signalsAdjusting the colors Calling the preset colors Signals that can be selected by the AUX bus Switching the AUX outputName of signal Description of signal Selecting the AUX output materials AUX1 transitions Enable Enable Disable Disable Setting enable/disable for the AUX1 transition Memory Material selected Transition Pattern Menu Memory registration and recall items Storing the settings in the memory Store Recall Recalling the operations stored in the memory Recall Deleting the operations stored in the memory Delete Effect dissolve Transferring images from the AUX bus Frame memories Saving Images in Flash Memory SD memory cards Initializing the SD memory cards SetUp Configuration of folder at storage destinationSaving data on SD memory cards Characters which can be used for filenames Loading data from SD memory cards Displaying the SD memory card information Deleting files on SD memory cards Input/output signal settings Input signal settingsList of settings by input signal Setting the frame synchronizer List of input modes supported Setting the input mode Setting freeze Freezing the input signals Enabling the color corrector Color corrector  Adjusting the gain and hue of the C signal Tone curve Output levelInput level Adjusting the color matrix item gain Input image Setting the up-converter Fine-tuning of image positions Setting the analog input gain option Setting the analog composite input signals option Setting the DVI input signals Setting the DVI input signals optionDVI Input Board Digital/Analog Full-HD DVI Input Board Digital Automatic adjustment of the black level Automatic adjustment of the white levelInitializing the adjusted values Fit-V 1920 1280  720 1024 768 Fit-H 1680 1050 DVI format Mode HD/1080i HD/720P1600 1200 1920 1200 Input XX DVIPhs ClkPhs H-Pos −16 −100 Adjusting the DVI input signals List of settings by output signal Setting the output signalsManual Output connector Asign DownCnv Dig Assigning the output signals DC down-converter Assigning the CLN signal 115 116 SQ squeeze Setting the down-converter optionEC edge crop LB letter box Setting the sync signals Adjusting the output signal phase Phase adjustment setup Frame synchronizer SignalsInput Video effects For 1080/59.94i format Example Phase relationship between input signals and output signals Setting the screen layout Setting the multi view display Name of signal Display on LCD LUM 0%, 25%, 50%, 75%, 100% Setting the split frame and characters Setting the tally displays Preset type setting procedure User type setting procedureChanging the material names High-resolution multi view mode  Examples of OSD displays Setting the on-screen display OSD Setting the ancillary data Setting the V ancillary dataSetting the embedded audio data System settings Setting the 169 squeeze modeSelecting the video format Assigning signals to the crosspoints Setting the crosspointsAssigning signals to the crosspoints Displaying the assignment statuses Button Signal Button Signal Description Setting the crosspoint switching Setting the user buttons Button assignmentsFunction name Description of function Shift Setting method Setting the date and time Setting the dateSetting the time Setting the IP address Network settingsSetting the subnet mask Display the MAC address Setting the LCD backlight Other settingsMenu delegation settings 60, 120 External device control Enable/Disable Setting for Control of External Devices Editor control Table of wipe patterns supportedGVG AV-HS450N Setting the GPI TALLY/GPI connector of mainframeTALLY/GPI connector of control panel  Output from the GPI output port  Control using the GPI input portAssign Item Description of function assigned Control method Assign Item Description of function assigned Output Functions that can be controlled from the unit Camera control AW-RP655N Connection specifications AW-HE100N, AW-PH405N, AW-PH360N Pin No  Connections for AW-HE100N, AW-PH405N or AW-PH360N SW1 SW2 SET UP OFF AW-IF400G Switch settings Connections for AW-PH400P AV-HS450N AW-PH400P CAM CTL Camera control settings  For controlling the lens Zooming PanTilt and Zm/Focs Operation of F5 in the setup screen Selecting Yes/No Cameras menu operationsChanging values Alarm message Alarm status displaysAlarm message displayed Type of trouble Operation Status displays Displaying the version information and option information Initializing Setting Data InitializationInitializing Fader Connecting the control panel and mainframe External interfacesLAN COM Editor TALLY/GPI Example of GPI Out and Alarm connectionsExample of GPI In connections Sub 50-pin, female, inch screw Sub 25-pin, female, inch screw Max. current 50 mATally LED Image transmission functions SpecificationsConnections LAN cable How to install the software Operation Setting the IP addressStartup Exit Transmitting images to the unit Transmitting images from the unit Setting menu table ParameterPVW Reset ↓ CHR KEY ChrkeyUndo ↓ Left Top Bottom Right TrimAdj Trim ManualPrior Synm Sync PinP2 DSK1 Hue Sat Lum Load ↓DSK2 Time EnblAUX1 EFF Dslv FTBCbgd Imag a Imag a IMG aImag B IMG B Imag B XPT CAM MV1 Patt Split Pos SignalFrame Char Label Tally MV1Frame MV2 Patt SDI InputClear ↓ RGB DVI ANA Output Outputyy DVI-I LCD-BL Menudlg ConfigShot MEM Enbl Sysconf GPIP-Out GPIP-In CONFIG11 CONFIG10CONFIG12 USER1 USER2 USER3 System SYS System Select Version SysVer SYSMainVer Select Board Version OptVer Mainframe AppearanceUnit inch mm Control panel  Mainframe AV-HS450U1N Specifications Composite input SDI outputsOption Analog input DVI-D input Video delay timeDVI-D output Reference Power supply Temperature HumidityDimensions Weight  Control panel AV-HS450C1N Supplied power cordExternal media Supplied AC adaptor Appendix glossary Freeze Frame MemoryFTB Fade to Black Genlock Preset Memory Preset BusPreview Program Bus Eastern Zone Panasonic Broadcast & Television Systems CompanyWestern Zone Technical Support