4. Input/output signal settings

4-1-2. Setting the input mode

The mode can be set for each input only when HD has been selected as the system format. When SD is selected as the system format, the input mode is always the same as Normal.

Normal: Input signals in conformity with the system format take effect.

D by D: When SD signals with the same frame rate as the system format have been input, they are input on a dot by dot (1magnification) basis with no up-conversion.

(This setting is only possible when the system format is 1080i.)

In this mode, there is minimal deterioration in the image quality and, as such, the mode is used to combine SD format material using the PinP function.

UC: When SD signals with the same frame rate as the system format have been input, they are up-converted.

Auto: Input signals in conformity with the system format take effect.

Furthermore, if SD signals with the same frame rate as the system format are input when HD is selected as the system format, they are up-converted.

In the Auto mode, the images may be disturbed when the input signals are switched.

On the INPUT XX sub menu, turn [F4] to set the input mode using the Mode item, and press the [F4] switch to enter the setting.

An asterisk () appears at the left of the input mode currently selected.

<List of input modes supported>

 

 

 

 

 

 

 

Input

 

 

 

 

System

Mode

480

576

1080

1080

 

1080

1080

720

720

 

 

 

/59.94i

/50i

/59.94i

/50i

 

/24psf

/23.98psf

/59.94p

/50p

SD

480/59.94i

 

 

576/50i

 

HD

1080/59.94i

Normal

 

 

 

DbyD

 

 

 

UC

 

 

 

Auto

(UC)

 

 

1080/50i

Normal

 

 

 

DbyD

 

 

 

UC

 

 

 

Auto

(UC)

 

 

1080/24psf

Normal

 

 

 

DbyD

 

 

 

UC

 

 

 

Auto

 

 

1080/23.98psf

Normal

 

 

 

DbyD

 

 

 

UC

 

 

 

Auto

 

 

720/59.94p

Normal

 

 

 

UC

 

 

 

Auto

(UC)

 

 

720/50p

Normal

 

 

 

UC

 

 

 

Auto

(UC)

 

denotes a black screen.

The UC mode or Auto mode cannot be selected for inputs 1 to 4.

If D by D, UC or Auto mode is selected, the frame synchronizer will be turned on.

The input mode cannot be changed when freeze is set to on.

98

Page 98
Image 98
Panasonic AV-HS450N manual Setting the input mode, List of input modes supported