Manuals / SUPER MICRO Computer / Power Tools / Stud Sensor

SUPER MICRO Computer 6014H-8 user manual Checking the Serverboard Setup, Check the CPUs processors

Models: 6014H-8

1 130
Download 130 pages 57.82 Kb
Page 26
Image 26

SUPERSERVER 6014H-8/6014H-82/6014H-X8 Manual

2-5 Checking the Serverboard Setup

After you install the 6014H-8/6014H-82/6014H-X8 in the rack, you will need to open the unit to make sure the serverboard is properly installed and all the connections have been made.

1.Accessing the inside of the System (see Figure 2-5)

First, release the retention screws that secure the system to the rack. Grasp the two handles on either side and pull the system straight out until it locks (you will hear a "click"). Next, depress the two buttons on the top of the chassis to release the top cover (1). Push the cover away from you (toward the rear of the chassis) until it stops (2). You can then lift the top cover from the chassis to gain full access to the inside of the server.

To remove the system from the rack completely, depress the locking tabs in the chassis rails (push the right-side tab down and the left-side tab up) to continue to pull the system out past the locked position. Another set of locking tabs will stop the chassis before it comes completely out of the rack.

2.Check the CPUs (processors)

You should have one or two processors already installed into the serverboard. Each processor needs its own heatsink. See Chapter 5 for instructions on processor and heatsink installation.

3.Verify the proper CPU clock ratio setting

If the CPU speed is not automatically detected you will need to set the correct speed with the BIOS Setup utility. See the CPU speed setting in BIOS (Chapter 7) for setting the proper CPU speed. (Most processor speeds are automatically detected so this step should be unnecessary.)

4.Check the system memory

Your 6014H-8/6014H-82/6014H-X8 server system may have come with system memory already installed. Make sure all DIMMs are fully seated in their slots. For details on adding system memory, refer to Chapter 5.

2-8

Page 25 Page 27
Page 26
Image 26
SUPER MICRO Computer 6014H-8 user manual Checking the Serverboard Setup, Accessing the inside of the System see Figure
Page 25 Page 27

6014H-8 specifications

Super Micro Computer 6014H-8 is a powerful and reliable server solution designed for a range of applications, from enterprise-level workloads to high-performance computing. Super Micro is known for its innovative server technology, and the 6014H-8 model embodies their commitment to quality and performance.

One of the standout features of the Super Micro 6014H-8 is its scalability. The server is built to support Intel's latest generation of Xeon processors, allowing it to handle multi-core tasks efficiently. This scalability ensures that businesses can adapt their server capabilities as their needs grow, making it an investment that can evolve over time.

The model supports up to 512GB of DDR4 ECC memory, which enhances data integrity and system performance. The use of error-correcting code (ECC) memory is particularly beneficial for mission-critical applications where data accuracy is essential. The 6014H-8 is also equipped with multiple DIMM slots, allowing for flexible configuration for different workloads.

In terms of storage, the 6014H-8 can accommodate a variety of SATA and SAS drives, offering extensive options for managing vast amounts of data. It typically supports several drive bays, which enable hot-swappable drives for easy maintenance and upgrades without downtime. This design feature is crucial for companies that require high availability and uptime.

Networking capabilities in the 6014H-8 are robust, with built-in support for multiple Gigabit Ethernet ports, providing high-speed connectivity. The server can also be equipped with various networking options, including 10GbE and additional network interface cards, allowing for enhanced data transfer speeds and reduced latency.

Another important characteristic of the 6014H-8 is its energy efficiency. Super Micro has designed this system with advanced thermal management technologies, ensuring that the server runs cool, even under heavy loads. With energy-efficient components, it contributes to lower operational costs while supporting environmentally sustainable practices.

Overall, Super Micro Computer 6014H-8 stands out as a versatile and powerful solution for organizations looking to enhance their computing capabilities. Its combination of scalability, robust memory options, flexible storage configurations, and advanced networking features make it an ideal choice for a wide range of applications, from virtualization to cloud computing and everything in between.