Chapter 5: Advanced Serverboard Setup
IDE Connectors
There are no jumpers to configure the onboard IDE#1 and #2 connectors. See the table below for pin defini- tions.
IDE Connector Pin Definitions
(J5, J6)
Pin Number Function | Pin Number Function | ||
1 | Reset IDE | 2 | GND |
3 | Host Data 7 | 4 | Host Data 8 |
5 | Host Data 6 | 6 | Host Data 9 |
7 | Host Data 5 | 8 | Host Data 10 |
9 | Host Data 4 | 10 | Host Data 11 |
11 | Host Data 3 | 12 | Host Data 12 |
13 | Host Data 2 | 14 | Host Data 13 |
15 | Host Data 1 | 16 | Host Data 14 |
17 | Host Data 0 | 18 | Host Data 15 |
19 | GND | 20 | Key |
21 | DRQ3 | 22 | GND |
23 | I/O Write- | 24 | GND |
25 | I/O Read- | 26 | GND |
27 | IOCHRDY | 28 | BALE |
29 | DACK3- | 30 | GND |
31 | IRQ14 | 32 | IOCS16- |
33 | Addr 1 | 34 | GND |
35 | Addr 0 | 36 | Addr 2 |
37 | Chip Select 0 | 38 | Chip Select 1- |
39 | Activity | 40 | GND |
|
|
|
|