SUPERSERVER
4.The item "Create RAID via" allows you to select between the differ- ent methods of creating RAID 0 and RAID 1.
The following table gives examples of when each is appropriate.
Raid Level | Create Via | When Appropriate |
RAID 0 | No Init | Creating a RAID 0 on new drives |
RAID 0 | Migrate | Creating a RAID 0 from one new drive and |
| (*Note) | one drive with data you wish to preserve |
RAID 1 | Build1 | Any time you wish to create a RAID 1, but especially if |
|
| you have data on one drive that you wish to preserve |
RAID 1 | Clear | Creating a RAID 1 on new drives, or when you want to |
|
| ensure that the array contains no data after creation. |
RAID 1 | Quick | Fastest way to create a RAID 1. |
|
| Appropriate when using new drives |
RAID 1 | Init |
|
|
|
|
5. When finished, press Done (as shown on the following screen).
Note: If you select Migrate for RAID 0, or Build for RAID 1, you will be asked to select the source drive. The contents of the source drive will be preserved. However, the data on the new drive will be lost.
