SUPER MICRO Computer 6014H-8 user manual X6DHR-8G/X6DHR-X8G Quick Reference

Chapter 5: Advanced Serverboard Setup

X6DHR-8G/X6DHR-X8G Quick Reference

Jumper	Description		Default Setting
JBT1	CMOS Clear		See Section 5-9
JP10	3rd PWR Supply Alarm En/Disable		Open (Disabled)
JPA2/JPA3	SCSI CH A/B Term. Enable/Disable		Open (Enabled)
JPF	PWR Force On		Open (Normal)
JPG1	VGA Enable/Disable		Pins 1-2 (Enabled)
JPL1	GLAN Enable/Disable		Pins 1-2 (Enabled)
JWD	Watch Dog		Pins 1-2 (Reset)
Connector		Description
COM1/COM2		COM1/COM2 Serial Port Connector/Header
DIMM#1A-DIMM#4B		Memory (SDRAM) Slots
FAN#1-5		Onboard CPU Fan/Chassis Fan Headers
GLAN1/2		Gigabit Ethernet Ports
J3/J4		SATA0/1 Connectors
J5/J6		IDE1/2 Hard Disk Drive Connectors
J9		IPMI 2.0 Connector
J11		System Management Bus Header
J12		Floppy Drive Connector
J32		SMB Power Connector
J38		4-Pin 12V Power Connector (required connection)
J1B1		Primary ATX 20-Pin Power Connector
J1D1		8-Pin 12V CPU Power Connector (required conn.)
JA1/JA2		SCSI Channel A/B Headers
JD1		PWR LED (pins 1-3) / Speaker (pins 4-7) Header
JD2		Front Panel USB Headers
JF1		Front Control Panel Connector
JL1		Chassis Intrusion Header
JOH1		Overheat LED
JP9		Power Fail Detect Header
JP11		Alarm Rest Header (Default: On)
JWOL		Wake-on-LAN Header
JWOR		Wake-on-Ring Header
USB0/1		Universal Serial Bus Ports
VGA		Video (Monitor) Port

5-13