Panasonic AV-HS450N manual System SYS

8. Setting menu table

Menu	Sub menu			Parameter 1	Parameter 2	Parameter 3	Parameter 4
	Turn F1 to select.			Turn F2 to select.	Turn F3 to select.	Turn F4 to select.	Turn F5 to select.
SYSTEM	(Message)		Parameter		The SYSTEM menu is locked.
(When
locked)			Display only
SYSTEM	SYS	1	Parameter	Mode ↓		HiRes ↓	16:9SQ
(When	Format		Setting range	1080/59.94i, 1080/50i, 1080/24psf,		On, Off	On, Off
unlocked)				1080/23.98psf, 720/59.94p, 720/50p,		(Selection enabled	(Selection enabled
				480/59.94i, 576/50i		when SD format is	when SD format is
						used)	used)
			Default value	1080/59.94i		Off	Off
	SYS	2	Parameter	System	H-Phase	V-Phase
	OutPhs		Setting range	0H, 1H	–1320 to +1319	–100 to +100
			Default value	1H	0	0
	SYS	3	Parameter	Sync ↓	BBSetup	GenLock
	Ref		Setting range	BBST, BBAD,	0IRE, 7.5IRE	Locked, UnLock
				TRI, INT
			Default value	BBST	7.5IRE	—
	SYS	4	Parameter	VAnci	E.Audio
	Anci		Setting range	On, Off	On, Off
			Default value	Off	Off
	SYS	5	Parameter	Power	Fan
	Alarm		Setting range	Alarm, NoAlarm	Alarm, NoAlarm
			Default value	Alarm	Alarm
	SYS	6	Parameter	Init ↓	F Init ↓
	Initial		Setting range
			Default value
	SYS	7	Parameter	IP Address			Save ↓
	NetWork1		Setting range	0 to 255	0 to 255	0 to 255	0 to 255
			Default value	192	168	0	10
	SYS	8	Parameter	Subnet Mask			Save ↓
	NetWork2		Setting range	0 to 255	0 to 255	0 to 255	0 to 255
			Default value	255	255	255	0
	SYS	9	Parameter	MAC Address
	NetWork3		Display only
	SYS	10	Parameter	Year	Month	Date	Set ↓
	Date		Setting range	2000 to 2099	1 to 12	1 to 31	—
			Default value	—	—	—	—
	SYS	11	Parameter	Hour	Minute	Second	Set ↓
	Time		Setting range	0 to 23	0 to 59	0 to 59	—
			Default value	—	—	—	—

179