Panasonic AV-HS450N manual  Menu function buttons Menu FUNCTION/AUX BUS Delegation,  Hold button

2.Functions in each area

Menu function buttons [MENU FUNCTION/AUX BUS DELEGATION]

These are used to select the menus organized by function.

Each time one of these buttons is pressed, the menu for its function is switched between the one displayed above and the one displayed below. Each time the [PinP1/PinP2] button or [DSK1/DSK2] button is pressed, the color used for their lighting is switched between amber and green. The other buttons light in amber.

Rotary encoders [F1] to [F5]

These are used to set the parameters displayed on the menus (LCD screen or on-screen display). For details on the operations, refer to the sections in “3. Basic operations”.

[F1]: Rotate this rotary encoder to switch the sub menu.

On the INPUT menu or OUTPUT menu, the signal to be set is switched.

[F2]: Turn this rotary encoder to set the parameters.

On the INPUT menu or OUTPUT menu, the third menu is switched.

[F3] to [F5]: Rotate these rotary encoders to set the parameters.

When the down arrow (↓) is shown at a menu item, its parameter is set by pressing the corresponding rotary encoder.

When the parameter is one which is set using a numerical value, its default will be restored when the rotary encoder is held down.

(However, the network settings and the date and time settings will not be returned to the defaults.)

Basic menu operations

For detailed operations, refer to the sections in “3. Basic operations”.

For the menu configurations, refer to “8. Setting menu table”.

Select the menus organized by function using the menu function buttons ().

Using the rotary encoders (), display the sub menu that will be used to establish the detailed settings, and set the parameters.

				Parameter setting area
			Third menu
	KEY	2Clip		Gain DensityInvert
Sub menu	Adjust		0.0 100.0 100.0				Off
	Operate here			Operate here		Operate here
	using [F1].		Operate here	using [F3].	Operate here	using [F5].
			using [F2].		using [F4].

 The INPUT menu and OUTPUT menu differ depending on whether an option board has been installed.

[HOLD] button

If the [HOLD] button is pressed while a menu is displayed, no other menu will be selected even when a menu function button () is pressed.

In addition, even if the AUX bus selection button () is pressed it will not switch to another bus. While the [HOLD] button is held down, it lights in amber.

26