Sample1 Matte Cln.FG | Panasonic AV-HS450N manual

3. Basic operations

Step 3

The objective of this step is to remove the noise in the foreground image.

The noise is removed by carrying out this step several times.

Turn [F2] to select “Matte” using the View item.

<Menu display>

CHRKEY 2View Mode	UNDO↓
Sample1 Matte Cln.FG

Turn [F3] to select “Cln.FG” using the Mode item.

Using the positioner, move the position of the sample marker to the position of the noise (white dots) in the foreground image.

To change the size of the sample marker, turn the rotary encoder [Z].

If the sample area that has been set is acceptable, press the rotary encoder [Z]. The noise in the area that has been set is now removed.

To return to the pre-sampling status after sampling has been executed, press [F5]. The number of operations that can be undone is one only.

Before the noise is removed

After the noise is removed

Page 55

Image 55

Panasonic AV-HS450N manual Sample1 Matte Cln.FG

Contents

Control panel AV-HS450C1N Mainframe AV-HS450U1N FCC Note Safety precautions For USA-California Only Important Safety Instructions Contents Input/output signal settings System settings 131 Multiple formats supported FeaturesCompact design, wide variety of input/output signals Description Sdhc memory cards supported High-quality chroma keys using Primatte algorithmsRedundant power supply Many different effect functions incorporated Board ConfigurationAccessories Optional boards sold separately Precautions for use Trademarks and Registered Trademarks Handle the control panel carefully InstallationInstalling the control panel Choosing the best installation location Handle the mainframe carefully Installing the mainframeSupport guides Slot a Slot B How to install the option boardsBlank panel Screw UTS INP DVI Connections Block diagramMainframe DVI-D AV-HS450NHD SDI HD SDI VTR AC adapter PC monitor Example where the optional board is usedDVD player VTR HD SDI SD SDI Control panel  Power indicator Power Alarm indicator Alarm Functions in each area  PGM/A bus crosspoint buttons PGM/A 1 to Crosspoint area PST/B bus crosspoint buttons PST/B 1 to  Wipe pattern and memory selector buttons  Pattern page indicator LEDsWipe pattern/memory area  AUX bus crosspoint buttons Transition area User button area  CUT button  MIX button Wipe button  Auto button  Fader lever  Wipe direction selection buttons Wipe Direction N/R, R Bus tally LEDs List of menu delegation functions LCD menu area Basic menu operations  Menu function buttons Menu FUNCTION/AUX BUS Delegation Rotary encoders F1 to F5  Hold button Wipe Bkgd Positioner area Positioner X/Y  Rotary encoder Z SD memory cards  SD memory card access LEDSD memory card area SD memory card slot Rear panel connections area Mainframe  Power switch POWER1, POWER2 Power indicator POWER1, POWER2  Alarm indicator ALARM1, ALARM2  Reference input connector/BB output connector REF  SDI signal input connectors SDI Inputs 1 to SDI signal output connectors SDI Outputs 1 to  DVI-D output connectors DVI-D Outputs 5  Cooling fan  LAN connector LAN RJ-45 10/100 Base-TX Ground connector Signal GND AC power input socket IN1 IN2 AC 100 V to 120 V, 50/60 Hz Selecting the bus Selecting the bus using the Shift functionBasic operations Background transition Menu display All ShiftSingle Shift  Allocating the Shift function Basic operations PGM PGM/A PGM/A, PST/B PVW PST Selecting the bus mode Cut transition Selecting the transition modeManual transition using the fader lever Auto transition Image Setting the Image effects Executing the Image effect  Table of wipe patterns How to select the wipe patternsWipe Selecting the wipe pattern SQ SQ SQ2 squeezeSL SL Selecting the wipe direction Selecting the background for the 3D2 pattern Wipe decorations border, soft effect Setting the border and soft effectSetting the border color  To call the preset color Pos, Y-Pos setting range Setting the wipe start position  For key transitions Setting the lighting effectModifying wipe  For background transitions Setting the trimming Key Chroma chroma key/self key Selecting the key typeLum luminance key/self key Linear linear key/EXT key  Setting in the Config menu Selecting the key fill signalSelecting the key source signal  Setting with AUX bus crosspoint buttons Pattern examples Key transitions Key auto transition Key preview Operation Parameter Description of setting Setting range Adjusting the luminance key and linear key Step  To execute the sampling automatically Adjusting the chroma key To execute the sampling manually Step Sample1 Matte Cln.FG Sample1 CmpsitSpl.Spg Chrkey 3 View Mode Spill Matte- Matte+ Spill- Spill+Matte RstrDtl Detail- Detail+Detail MatSpng MkFGTrn FineTun Setting the edge color Setting the key edgeKey decorations Turn F2 to F5 to set the area to be masked Masking the key signals Flying key PinP combinations using the flying key Selecting the PinP channel and material PinP picture in picture PinP preview Selecting Shape Adjusting the PinP position and size PinP adjustmentsPinP transitions Select the dot by dot mode Adjusting the rotation angle Linking PinP1 and PinP2 Setting the priorityLinking PinP1 and PinP2 PinP decorations Trimming settings Selecting the DSK type DSK downstream key Setting the fill matte color Selecting the DSK channel and DSK fill material Selecting the DSK source signal DSK preview DSK transitions DSK adjustments DSK decorations Masking the DSK signals FTB fade to black Calling the preset colors Internal color signalsSetting the color background Adjusting the colors Selecting the AUX output materials Switching the AUX outputSignals that can be selected by the AUX bus Name of signal Description of signal AUX1 transitions Enable Enable Disable Disable Setting enable/disable for the AUX1 transition Memory Material selected Transition Pattern Menu Memory registration and recall items Storing the settings in the memory Store Recall Recalling the operations stored in the memory Recall Deleting the operations stored in the memory Delete Effect dissolve Transferring images from the AUX bus Frame memories Saving Images in Flash Memory SD memory cards Initializing the SD memory cards Configuration of folder at storage destination SetUpSaving data on SD memory cards Characters which can be used for filenames Loading data from SD memory cards Displaying the SD memory card information Deleting files on SD memory cards Input signal settings Input/output signal settingsList of settings by input signal Setting the frame synchronizer List of input modes supported Setting the input mode Setting freeze Freezing the input signals Enabling the color corrector Color corrector  Adjusting the gain and hue of the C signal Output level Tone curveInput level Adjusting the color matrix item gain Input image Setting the up-converter Fine-tuning of image positions Setting the analog input gain option Setting the analog composite input signals option Full-HD DVI Input Board Digital Setting the DVI input signals optionSetting the DVI input signals DVI Input Board Digital/Analog Automatic adjustment of the white level Automatic adjustment of the black levelInitializing the adjusted values Fit-H 1920 1280  720 Fit-V 1024 768 1920 1200 DVI format Mode HD/1080i HD/720P1680 1050 1600 1200 Input XX DVIPhs ClkPhs H-Pos −16 −100 Adjusting the DVI input signals DownCnv Dig Setting the output signalsList of settings by output signal Manual Output connector Asign Assigning the output signals DC down-converter Assigning the CLN signal 115 116 LB letter box Setting the down-converter optionSQ squeeze EC edge crop Setting the sync signals Adjusting the output signal phase Phase adjustment setup Video effects SignalsFrame synchronizer Input For 1080/59.94i format Example Phase relationship between input signals and output signals Setting the screen layout Setting the multi view display Name of signal Display on LCD LUM 0%, 25%, 50%, 75%, 100% Setting the split frame and characters Setting the tally displays User type setting procedure Preset type setting procedureChanging the material names High-resolution multi view mode  Examples of OSD displays Setting the on-screen display OSD Setting the V ancillary data Setting the ancillary dataSetting the embedded audio data Setting the 169 squeeze mode System settingsSelecting the video format Displaying the assignment statuses Setting the crosspointsAssigning signals to the crosspoints Assigning signals to the crosspoints Button Signal Button Signal Description Setting the crosspoint switching Button assignments Setting the user buttonsFunction name Description of function Shift Setting method Setting the date Setting the date and timeSetting the time Display the MAC address Network settingsSetting the IP address Setting the subnet mask 60, 120 Other settingsSetting the LCD backlight Menu delegation settings External device control Enable/Disable Setting for Control of External Devices Table of wipe patterns supported Editor controlGVG AV-HS450N TALLY/GPI connector of mainframe Setting the GPITALLY/GPI connector of control panel Assign Item Description of function assigned Output  Control using the GPI input port Output from the GPI output port Assign Item Description of function assigned Control method Functions that can be controlled from the unit Camera control AW-RP655N Connection specifications AW-HE100N, AW-PH405N, AW-PH360N Pin No  Connections for AW-HE100N, AW-PH405N or AW-PH360N AV-HS450N AW-PH400P AW-IF400G Switch settingsSW1 SW2 SET UP OFF  Connections for AW-PH400P CAM CTL Camera control settings  For controlling the lens Zooming PanTilt and Zm/Focs Cameras menu operations Operation of F5 in the setup screen Selecting Yes/NoChanging values Status displays Alarm status displaysAlarm message Alarm message displayed Type of trouble Operation Displaying the version information and option information Initialization Initializing Setting DataInitializing Fader External interfaces Connecting the control panel and mainframeLAN COM Editor Sub 50-pin, female, inch screw Example of GPI Out and Alarm connectionsTALLY/GPI Example of GPI In connections Max. current 50 mA Sub 25-pin, female, inch screwTally LED LAN cable SpecificationsImage transmission functions Connections How to install the software Exit Setting the IP addressOperation Startup Transmitting images to the unit Transmitting images from the unit Parameter Setting menu tablePVW CHR KEY Chrkey Reset ↓Undo ↓ PinP2 Trim ManualLeft Top Bottom Right TrimAdj Prior Synm Sync Hue Sat Lum Load ↓ DSK1DSK2 Enbl TimeAUX1 FTB EFF DslvCbgd Imag B Imag a IMG aImag a Imag B IMG B XPT CAM MV2 Patt Split Pos SignalMV1 Patt Frame Char Label Tally MV1Frame RGB InputSDI Clear ↓ DVI ANA Output Outputyy DVI-I Enbl Sysconf ConfigLCD-BL Menudlg Shot MEM GPIP-Out GPIP-In USER1 USER2 USER3 CONFIG10CONFIG11 CONFIG12 System SYS System Select Board Version OptVer SYSSelect Version SysVer MainVer Control panel AppearanceMainframe Unit inch mm  Mainframe AV-HS450U1N Specifications Analog input SDI outputsComposite input Option Reference Video delay timeDVI-D input DVI-D output Weight Temperature HumidityPower supply Dimensions Supplied AC adaptor Supplied power cord Control panel AV-HS450C1N External media Appendix glossary Genlock Frame MemoryFreeze FTB Fade to Black Program Bus Preset BusPreset Memory Preview Technical Support Panasonic Broadcast & Television Systems CompanyEastern Zone Western Zone