3. Basic operations

3-1-4. Selecting the transition mode

Press the [BKGD] button in the transition area so that its indicator lights in amber.

When the [BKGD] button and [KEY] button are pressed at the same time, both buttons are selected.

Use the [MIX] and [WIPE] buttons in the transition area to select the background transition mode. The indicator of the selected button lights in amber.

3-1-5. Manual transition (using the fader lever)

Operate the fader lever to execute transitions manually.

If the fader lever has been operated during auto transition, auto transition will be switched to manual operation as soon as the fader position overtakes the amount of the transition being executed.

The bus tally LEDs on the left of the fader lever indicate the program bus output status.

Top LED only lights: PGM/A bus output

Top and bottom LEDs light: during the transition

Bottom LED only lights:

PST/B output

3-1-6. Auto transition

When the [AUTO] button is pressed, the transition is executed automatically using the transition time which has been set.

When the [AUTO] button is pressed while the fader lever is at an interim setting, the transition is executed in the time remaining from the interim setting.

The auto transition time is set using the TIME menu.

Press the [TIME] button to light its indicator, and display the TIME menu.

Refer to “2-1-5. LCD menu area”.

Turn [F1] to display the BKGD sub menu.

Turn [F4] to select the display unit using the Unit item.

When frames (Frame) have been selected as the unit, turn [F3] to set the transition time.

When seconds (Sec) have been selected as the unit, turn [F2] to set the second units or [F3] to set the frame units.

<Menu display>

TIME

1TransTime

Unit

BKGD

16s

39f

 

Sec

 

 

 

 

TIME

1TransTime

Unit

BKGD

 

999f

Frame

Any time from 0 to 999f can be set. The time which can be set when seconds are used as the display unit differs depending on the video format.

59.94i: max. 33s09f, 59.94p: max. 16s39f, 50i: max. 39s24f, 50p: max. 19s49f,

24psf: max 41s15f, 23.98psf: max 41s15f

3-1-7. Cut transition

When the [CUT] button is pressed, the transition is executed instantly.

37

Page 37
Image 37
Panasonic AV-HS450N manual Selecting the transition mode, Manual transition using the fader lever, Auto transition