Panasonic AV-HS450N manual Connections, Block diagram, Mainframe

1. Installation
1-4. Connections
1-4-1. Block diagram
	Mainframe
		FS	Black		BKGD
	INPUT		ColorBGD	CUT, MIX, WIPE, DVE2
	1 to 8		ColorBar		KEY			OUTPUT	OUTPUT (SDI)
			FMEM1 to 4		CUT, MIX, WIPE, DVE
					PinP1, 2			1 to 4	1 to 4 (3)
	INPUT	FS
INPUT (SDI)					MIX	Output
1 to 16	9 to 12	CC			DSK1, 2	MTX
			MTX		MIX
		FS						OUTPUT	OUTPUT (DVI-D)
	INPUT				FTB
		UC			AUX1 to 4			5, 6	5, 6
	13 to 16
		CC			MV1, 2
INPUT					Option slot A				OUTPUT
A1, A2									A1, A2
INPUT					Option slot B				OUTPUT
B1, B2									B1, B2
AC IN									REF
		AC/DC		Power			REF IN/OUT (1)
		AC/DC					REF OUT (2)
		RJ45	RJ45		Dsub 50	Dsub 9		Dsub 9
	LAN		PANEL		TALLY/GPI		EDITOR	COM
	(5)		(4)

		ALARM: 1
		GPI-OUT: 31	 Camera
		GPI-IN: 8
	SD	ALARM: 1	 Pan/Tilt Head
PC	memory		 Controller
	card	GPI-OUT: 8
		GPI-IN: 8
	MAINFRAME	TALLY/GPI

	RJ45	Dsub 25
DC IN
AC/DC	Power	Editing
		controller
AC/DC
	Control panel	Aux panel

1: When external synchronization is selected as the reference signal setting, the reference signal is input. When internal synchronization is selected, the reference signal is output.

2: When external synchronization is selected as the reference signal setting, the signals are looped through and output. When internal synchronization is selected, the reference signal is output.

3: Two sets of the same output signals are distributed from OUTPUT (SDI) 1.

4: Connect the PANEL connector directly to the MAINFRAME connector using the supplied CAT5E cable.

5: Do not connect to a public line when connecting a PC.

16