Panasonic AV-HS450N manual Selecting the key material, Selecting the key fill signal

3. Basic operations

3-4-2. Selecting the key material

Selecting the key fill signal

Press the [KEY] button among the AUX bus selector buttons to light its indicator, and press one of the AUX bus crosspoint buttons 1 to 32 to select the key fill signal.

Selecting the key source signal

On the CONFIG menu, set the key source for key fill.

This setting is the same for KEY and DSK.

Setting with AUX bus crosspoint buttons

Press the [KEY] button (or [DSK 1/2] buttons) of the AUX bus selector buttons to light its indicator, and hold down the AUX bus crosspoint button for the selected key fill signal.

<Menu display>

XPTStats	FILL:	INPUT1	SRC↓ INPUT1
	XPT :	1

Turn the [F5] and select a key source signal (SRC) for the key fill signal (FILL), and press the [F5] switch.

Setting in the CONFIG menu

Press the [CONFIG] button to light its indicator, and display the CONFIG menu.

Refer to “2-1-5. LCD menu area”.

Turn [F1] to display the KSAsign sub menu.

<Menu display>

CONFIG11Fill	Source↓
KSAsign	—	—

IN1~16 IN1~16

IN-A1 IN-A1

IN-A2 IN-A2

IN-B1 IN-B1

IN-B2 IN-B2

CBGD CBGD

CBAR CBAR

FMEM1~4 FMEM1~4

NoAsign

Turn [F2] to select the key fill material using the Fill item.

Turn [F3] to select the key source material using the Source item, and press the [F3] switch.

The luminance and chroma keys are used as self keys so the key fill signal can be used as the key source signal regardless of the menu setting.

49