Plantronics manual Diagram Key, Getting Started, INSTALLING THE CS50-USB/CS60-USBBASE UNIT

USAGE INSTRUCTIONS

DIAGRAM KEY

HEADSET		DESK CHARGER
1	Microphone	8	AC Power Adapter
2	Speaker	9	AC Power Adapter Port
3	Talk Button	10	Headset Docking Cradle
4	Volume/Mute Control	11	Charge Contacts
5	On-line Indicator	12	Status Indicator
6	Charge Contacts	13	Charge Indicator
7	Battery Door	14	Stand
		15	Stand Pegs
		16	Ringer Switch On/Off
		17	USB Connector
		18	Subscription button access hole
			(paperclip required)

1. GETTING STARTED

To use your Plantronics CS50-USB/CS60-USB Headset System, please follow these simple steps:

1.Install the hardware.

2.Install the software.

3.Charge your headset battery.

4.Choose your headset wearing style.

5.Carry out the initial set-up

INSTALLING THE CS50-USB/CS60-USB BASE UNIT

To install the base-unit, attach the stand by inserting the Stand Pegs into the locating holes on the underside of the base unit. Connect to the USB connector shown in Fig. 2 on page 1 to a free USB port on your computer. A USB hub can be used but you should ensure it can supply sufficient power (250mA) to charge the headset. This will create the finished assembly (refer to Fig.3, page 1). Alternatively, the Velcro strips included can be used to attach the base unit to a PC monitor. The optional AC Power Adapter can be installed as shown in Fig. 2.1

6