Sheet 2, Fixture Maintenance Relamping | Cooper Lighting IMI-682SW

INSTALLATION INSTRUCTIONS

IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.

Talon Large

Sheet 2 of 3

7/23/08IMI-682SW

WARNING: Risk of Fire/Electric Shock. If not qualified, consult an electrician.

WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.

WARNING: Risk of Burn. Disconnect power and allow fixture to cool before changing bulb or handling fixture.

WARNING: Risk of Personal Injury. Fixture may become damaged and/or unstable if not installed properly. Tighten all fixture components to their recommended torque values.

WARNING: Risk of Fire/Electrical Shock. Upside down installation can result in overheating or accumulation of water in fixture. Install right side up.

4.With the pole and fixture(s) raised into position, place the power tray onto the hinges of the housing electrical compartment and let it hang free. Locate the power connector plug and rotate the power tray until the

connection can be made with the mating connector in the housing. Raise the power tray until the two (2) thumbscrews engage and tighten until fully snug. FIG. 3

FIG. 3

5.Replace door on the hinges at the rear of the housing, rotate into position, and assure that both latches are fastened securely.

FIXTURE MAINTENANCE

RELAMPING

PowerTray

1.Disengage both latches and open the door. Do not let the door swing freely on the hinges.

Thumbscrews (2)

FIG. 4

2.Replace the lamp with the appropriate type and wattage and reassemble

the refractor to the upper housing. FIG. 4

3.Close the door and assure that the latches are securely fastened.

NEMA PHOTOCONTROL REPLACEMENT

1.The photocontrol is mounted on top the housing. FIG. 5

2.Remove the photocontrol by twisting counterclockwise and replace.

PLUG-IN STARTER REPLACEMENT

1.This procedure applies to fixtures with a plug-in type starter. Disengage both latches and open the door. Do not let the door swing freely on the hinges. Loosen the power tray thumbscrews, unplug the power connector as you lower the powertray, and continue lowering until the powertray hangs free on the hinges. The starter is located in the position shown. Remove and replace. Reverse the directions to secure the powertray and the door after starter replacement.

Latches

Lamp

Removable Powertray

Lift And Hang On Hinges

Removable Door

Lift And Hang

Door On Hinges

NEMATwistlock

Photocontrol

FIG. 5

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.

NOTE: Specifications and dimensions subject to change without notice.

Visit our web site at www.cooperlighting.com

Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 ADW081603

IMI-682SW specifications

Cooper Lighting's IMI-682SW is an innovative and versatile LED recessed downlight designed to meet the demands of modern architectural spaces. With its sleek design and advanced features, the IMI-682SW is perfect for both residential and commercial applications. Its compact size and low profile ensure it seamlessly integrates into any ceiling, enhancing ambiance without being obtrusive.

One of the standout features of the IMI-682SW is its energy efficiency. Utilizing cutting-edge LED technology, this downlight delivers exceptional lumen output while significantly reducing energy consumption compared to traditional halogen and incandescent fixtures. This not only helps in lowering electricity bills but also contributes to a more sustainable environment, making it an ideal choice for eco-conscious consumers.

The IMI-682SW is equipped with the capability of dimming, allowing users to adjust light levels to create the perfect atmosphere for any occasion. Whether it’s a bright setting for focused tasks or a softer glow for relaxation, the flexibility of dimming enhances every space’s functionality. It can be smoothly transitioned between different brightness levels without flickering, thanks to its compatibility with a variety of dimmer switches.

Another significant feature is its versatile color temperature options. The IMI-682SW comes with the ability to produce a range of color temperatures, from warm white to cool daylight. This versatility enables users to tailor the lighting to their specific needs, enhancing the aesthetics of any room. Its excellent color rendering capabilities ensure that colors appear truer and more vibrant under its illumination.

The durability of the IMI-682SW cannot be overlooked. Built with high-quality materials, the fixture is designed to withstand the test of time, making it suitable for both indoor and outdoor applications. Its robust construction guarantees resistance to the elements, making it an ideal solution for areas exposed to moisture or varying weather conditions.

Installation of the IMI-682SW is straightforward, with a flexible mounting system allowing for easy integration into various ceiling types. This simplicity ensures that professionals and DIY enthusiasts alike can achieve a flawless finish with minimal effort.

In conclusion, the Cooper Lighting IMI-682SW is a premium choice for those seeking an efficient, versatile, and durable lighting solution. With its sleek design, advanced technologies, and user-friendly features, it meets the demands of contemporary lighting needs while promoting energy conservation and sustainability. Whether for enhancing the aesthetic appeal of a home or providing functional lighting in a commercial setting, the IMI-682SW stands out as a top-tier option in the lighting market.