ADTRAN ISU 2X64 user manual DTE Flow, Dte, Dce, DTE Clock

				Appendix D: S-Register List
S74.......DTE STOP		Selects the number of asynchronous stop bits. More
		than one option can be set at the same time.
		0	=	1 stop bit (default)
		1	=	1.5 stop bits
		2	=	2 stop bits
S75	DTE FLOW	Selects asynchronous flow control
		0	=	None (default)
		1	=	Hardware flow. CTS from DCE controls DTE.
		2	=	Hardware flow. RTS from DTE controls DCE.
		3	=	Hardware flow. RTS and CTS flow control.
		4	= Software flow. XON/XOFF from DCE controls
		DTE.
		8	= Software flow. XON/XOFF from DTE controls
		DCE.
		12 = Software flow. XON/XOFF controls DTE and
		DCE.
S76	DTE CLOCK	Selects DTE connector transmit clock timing source.
		0	=	Internal (ISU 2x64 supplies timing) (default)
		1	= External (DTE supplies timing)
S135		Value determines whether or not the ISDN switch
		should consider a DTE port busy. S23 must be pro-
		grammed before this register is used.
		0	= DTE port is not busy (default)
		1	= DTE port is busy

The following are the string locations for stored numbers 0 - 9:

SS80	.....SN0 LOC
SS81	.....SN1 LOC
SS82	.....SN2 LOC
SS83	.....SN3 LOC
SS84	.....SN4 LOC
SS85	.....SN5 LOC
SS86	.....SN6 LOC
SS87	.....SN7 LOC
SS88	.....SN8 LOC
SS89	.....SN9 LOC
S118	= 0
S118	=32

Stored number 0 string Stored number 1 string Stored number 2 string Stored number 3 string Stored number 4 string Stored number 5 string Stored number 6 string Stored number 7 string Stored number 8 string Stored number 9 string CHAP Authentication (default)

PAP Authentication (required for MP connection with WIN 95)

61200051L1-1D ISU 2x64 Dual Port ISDN Service Unit User Manual 117