TM
INSTALLATION INSTRUCTIONS
IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.
RETAIN FOR FUTURE REFERENCE.
Flite
Sheet 2 of 8
8/31/04 IMI-597
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.
Reflector
Connector
Reflector Tabs | Reflector |
|
Fig. 2b | Fig. 2c |
3.Power Supply Tray Removal -
Unscrew the two THUMB SCREWS and swing the POWER SUPPLY TRAY down as shown in Figure 3a. Disconnect the POWER CONNECTOR and the OPTIC CONNECTOR from HOUSING. See Figure 3b. The POWER SUPPLY TRAY can now be lifted off the bracket.
Power Connector
Optic Connector
Power Supply
Tray
Thumb Screws 
Fig. 3a | Fig. 3b |
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269