Sheet 4 | Cooper Lighting IMI-597 guide

INSTALLATION INSTRUCTIONS

IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.

RETAIN FOR FUTURE REFERENCE.

Flite

Sheet 4 of 8

8/31/04 IMI-597

WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.

5a. Attach the Lower Flite Arm (Single Head) -

Attach the LOWER FLITE ARM to the UPPER FLITE ARM using the three (3) 5/16-18 x 1.25” screws provided. Please see Figure 5a. Be careful to route the wires through and along the arm so that they will not be pinched when the arms are tightened. Torque: 250 in-lbs.

NOTE: To assure a safe product over time, check and adjust torque to proper settings each time unit is maintenanced.

Lower Flite Arm

Fig. 5a

WARNING

Risk of Personal Injury

Fixture may become damaged and/or unstable if not installed properly

Tighten all fixture components to their recommended torque values

5b. Attach the Lower Flite Arm (Dual Head) -

Attach the LOWER FLITE ARM to the UPPER FLITE ARM using the three (3) 5/16-18 x 1.25” screws provided. Please see Figure 5b. Be careful to route the wires through and along the arm so that they will not be pinched when the arms are tightened. Torque: 250 in-lbs.

NOTE: To assure a safe product over time, check and adjust torque to proper settings each time unit is maintenanced.

Fig. 5b

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.

Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269 IMI-597 AVU040197