Sheet 6 | Cooper Lighting IMI-597 instruction

INSTALLATION INSTRUCTIONS

IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.

RETAIN FOR FUTURE REFERENCE.

Flite

Sheet 6 of 8

8/31/04 IMI-597

WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.

7a. Slipping the Assembly over the Pole (Single Head) -

Slip the fixture assembly over a 4-inch diameter pole as shown in Figure 7a. There is a shoulder inside the arm that will rest on the top of the pole. Make wiring connections at the opening at the top of the arm.

Fig. 7a

Fig. 7b

7b. Slipping the Assembly over the Pole (Dual Head) - Slip the fixture assembly over a 4-inch diameter pole as

shown in Figure 7b. There is a shoulderinside the arm that will rest on the top of the pole. Make wiring connections at the opening at the top of the arm.

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.

Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269 IMI-597 AVU040197