TM
INSTALLATION INSTRUCTIONS
IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.
RETAIN FOR FUTURE REFERENCE.
Flite
Sheet 7 of 8
8/31/04 IMI-597
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.
8a. Attaching the Mast and Pole Cap (Single Head) -
Assemble the ARM MAST and POLE CAP to the fixture and arm assembly. See Figure 8a. Tighten the six (6) screws that clamp the arm to the pole in addition to the set screws that secure the ARM MAST and
POLE CAP. Torque: 250 in-lbs.
NOTE: To assure a safe product over time, check and adjust torque to proper settings each time unit is maintenanced.
Fig. 8a
WARNING
Risk of Personal Injury
Fixture may become damaged and/or unstable if not installed properly
Tighten all fixture components to their recommended torque values
Fig. 8b
8b. Attaching the Mast and Pole Cap (Dual Head) -
Assemble the ARM MAST and POLE CAP to the fixture and arm assembly. See Figure 8b. Tighten the six (6) screws that clamp the arm to the pole in addition to the set screws that secure the ARM MAST and POLE CAP.
Torque: 250 in-lbs.
NOTE: To assure a safe product over time, check and adjust torque proper settings each time unit is maintenanced.
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269