Uniden EXR2460 manual Cleaning the Battery Contacts, Setting the PULSE/TONE Switch

Page 14

Low Battery

TIP

Most phone systems use tone dialing. Check with your local phone company if you’re not sure whether your system is tone or pulse.

▼Low battery indicator

When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in

use, Low Battery flashes. If the phone is in use, Low Battery flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base for charging.

CLEANING THE BATTERY CONTACTS

To maintain a good charge, clean all charging contacts on the handset and base about once a month with a pencil eraser or other contact cleaner. DO NOT use liquids or solvents; you may damage your phone.

SETTING THE PULSE/TONE SWITCH

Be sure the PULSE/TONE switch is in the TONE position unless your local phone system uses pulse dialing.

Image 14

Contents Page Contents Features WelcomeShort Telephone Cord Included in Your PackageHandset Base Long Telephone Cord Desktop/ Wall MountPlug the AC adapter into a standard 120 V AC wall outlet DESK/TABLETOP InstallationWrap the AC adapter cord around the strain relief notch Back of the baseAttach the desktop stand to the base Wall InstallationStandard wall plate mounting Then push in and down until the phone is firmly seated Page Direct wall mounting Page Install I N G a N D a D J U S T I N G Installing the Handset Battery Pack Slide the battery cover on Until it snaps into placeCharging optional battery packs Charging the Battery PackInitial battery charging Place the handset on the baseLow battery indicator Cleaning the Battery ContactsSetting the PULSE/TONE Switch Handset ringer volume Handset earpiece volumeRemove the slot cover To attach the beltclipTo remove the beltclip Pull back on the release tab and pull the beltclip upAutomatic Digital Code Security Headset InstallationTo reset the digital security code Making and Receiving Calls Flash and Call WaitingPress select. The following screen Storing a Phone Number in MemoryUse the and keys to scroll through the character menu. Use Enter the phone number with the number keypad direct entryWith cursor next to Edit Memory Editing a Phone Number in MemoryYou have selected in the display Use the key to move the cursor Use the key to move the cursor to the Yes commandErasing a Number from Memory Your programmed memory locations Using Memory DialingTraveling OUT-OF-RANGE Press talk and the number is dialedTo change your Caller ID options Using Caller IDSetting up Caller ID options To review your Caller ID messages, follow the steps below Screening your callsReviewing Caller ID messages Total messagesCalling a Caller ID number Storing a Caller ID number into a memory locationDeleting a Caller ID message Deleting all Caller ID messagesPress call id to return to standby Using RedialUsing the Tone Feature Press redial, then press talkUsing the page Feature Quick Reference Chart Place the base unit away from Receive aFrom the base unit Appliances or metal objectsBase Talk mode Hours Standby mode DaysGener AL HandsetControls