Uniden EXR2460 Using Memory Dialing, Traveling OUT-OF-RANGE, Your programmed memory locations

Page 22

HINT

Use the < and > keys to toggle between the names and the numbers displayed in memory.

8) Press select. There is a confirmation
8) Press select. There is a confirmation
tone, and the handset displays	Memory 1 Deleted
Memory 1 Deleted.

9)The display then returns to the Memory Store screen. You may select another number to delete (return to step 3) or you may press memory to return to standby.

USING MEMORY DIALING

Follow the steps below to dial a number using a programmed memory location.

	1) Press memory. The handset displays
		1	>SMITH JOHN
	your programmed memory locations.
		2	Uniden

		3	Grandma

2)Use the : and ; keys or the number keypad to select the memory location you would like to dial.

3)Press talk and the number is dialed.

1SMITH JOHN 2> Uniden

3 Grandma

	When the handset is removed from the base, press
NOTE	talk, then memory on the handset keypad before
NOTE	selecting the memory location

TRAVELING OUT-OF-RANGE

As you begin to move too far from your base unit, you will first hear

aclicking sound. As you travel further out-of-range, the voice transmission will begin to break up. If you pass the range limits of the base unit, your call will terminate.

20

Image 22

Contents Page Contents Features WelcomeShort Telephone Cord Included in Your PackageHandset Base Long Telephone Cord Desktop/ Wall MountPlug the AC adapter into a standard 120 V AC wall outlet DESK/TABLETOP InstallationWrap the AC adapter cord around the strain relief notch Back of the baseStandard wall plate mounting Wall InstallationAttach the desktop stand to the base Then push in and down until the phone is firmly seated Page Direct wall mounting Page Install I N G a N D a D J U S T I N G Installing the Handset Battery Pack Slide the battery cover on Until it snaps into placeCharging optional battery packs Charging the Battery PackInitial battery charging Place the handset on the baseSetting the PULSE/TONE Switch Cleaning the Battery ContactsLow battery indicator Handset ringer volume Handset earpiece volumeRemove the slot cover To attach the beltclipTo remove the beltclip Pull back on the release tab and pull the beltclip upTo reset the digital security code Headset InstallationAutomatic Digital Code Security Making and Receiving Calls Flash and Call Waiting Press select. The following screen Storing a Phone Number in Memory Use the and keys to scroll through the character menu. Use Enter the phone number with the number keypad direct entryYou have selected in the display Editing a Phone Number in MemoryWith cursor next to Edit Memory Erasing a Number from Memory Use the key to move the cursor to the Yes commandUse the key to move the cursor Your programmed memory locations Using Memory DialingTraveling OUT-OF-RANGE Press talk and the number is dialedSetting up Caller ID options Using Caller IDTo change your Caller ID options To review your Caller ID messages, follow the steps below Screening your callsReviewing Caller ID messages Total messagesCalling a Caller ID number Storing a Caller ID number into a memory locationDeleting a Caller ID message Deleting all Caller ID messagesPress call id to return to standby Using RedialUsing the Tone Feature Press redial, then press talkUsing the page Feature Quick Reference Chart Place the base unit away from Receive aFrom the base unit Appliances or metal objectsBase Talk mode Hours Standby mode DaysGener AL HandsetControls