9)Press select. The handset beeps and displays a confirmation screen. For example, if you store a name and number into memory location number one, then the handset shows Memory 1 Stored.
Memory 1 Stored
10)The display then returns to the Memory Store screen. You may select another number to edit (return to step 3) or you may press memory to return to standby.
ERASING A NUMBER FROM MEMORY
Use these steps to erase a programmed number from memory. Once a number is erased, that memory location may be programmed with a new number.
1)Remove the handset from the base.
2)Press and hold memory until the confirmation tone sounds. The handset shows the Memory Store screen with any saved numbers displayed.
Memory Store
1> SMITH JOHN
2UNIDEN
NOTE
If you select Go Back
3)Use the : and ; keys or number keypad to select the memory location you would like to delete. The < and > keys toggle between the names display and the numbers display.
at any time, no changes are made and the handset shows the Memory
Store screen.
NOTE
If you select No, no changes are made and the handset shows the Memory Store screen.
4)Press select. The following screen appears with the memory location number that you have selected in the display.
5)Use the ; key to move the > cursor
down to the Delete Memory
command.
6)Press select. The following confirmation screen appears.
>Edit Memory 1 Delete Memory 1 Go Back
Edit Memory 1
>Delete Memory 1 Go Back
Delete Memory? Yes
>No
U S I N G Y O U R
7) Use the : key to move the > cursor to the Yes command.
19
P H O N E