Uniden EXR2460 manual Editing a Phone Number in Memory, You have selected in the display

NOTE

EDITING A PHONE NUMBER IN MEMORY

Follow these steps to edit a phone number that you have already programmed into memory.

Whenever you are using a menu screen, you must press a key within 20 seconds or the phone will return to standby. You may also press memory to exit a memory menu at any time.

1)Remove the handset from the base.

2)Press and hold memory until the confirmation tone sounds. The display shows the Memory Store screen and any saved numbers.

Memory Store

1> SMITH JOHN

2UNIDEN

NOTE

If you select Go Back at any time, no changes are made and the handset shows the Memory Store screen.

3)Use the : and ; keys or number keypad to select the memory location you would like to edit. The < and > keys toggle between the names display and the numbers display.

4)	Press select. The following screen appears
			> Edit Memory 1
	with the memory location number that		Delete Memory 1
	you have selected in the display.
			Go Back
		You may move the > cursor down to Go Back and
	NOTE	press select if you would like to exit this menu.
5)	With > cursor next to Edit Memory,
			Store Name
	press select. The following screen appears,		SMITH JOHN
	and a cursor flashes indicating that the
	display is ready for the name to be edited.

6)Use the : and ;keys to scroll through the character menu. Use the

<and >keys to move the cursor to the desired location, and enter the name.

7) Press select. The following screen
	Store Number
appears, and a cursor flashes indicating	817 555 1212
that the display is ready for the number
to be edited.

8)Enter the phone number with the number keypad (direct entry) or the : and ; keys.

18