Uniden EXS9110 owner manual Charging the Battery Pack, Initial battery charging

Page 11

Please visit your authorized Uniden dealer to obtain an extra battery pack or contact the Uniden parts department at (800)554-3988. Hours are from 8:00 a.m. to 5:00 p.m. Central Time, Monday through Friday.

CHARGING THE BATTERY PACK

Initial battery charging

Before plugging the phone line into your new phone for the first time, fully charge the rechargeable battery pack for 15-20 hours

without interruption.

1)Place the handset on the base.

2)Make sure that status LED lights. If the LED doesn’t light, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.

Charging optional battery packs

The base unit of your phone is equipped with a compartment for charging an extra battery pack for use in your handset. You can obtain an extra battery pack from your authorized Uniden dealer.

1)Position the battery pack so the inner side with contacts is facing up.

2)Slide the battery pack into the charging compartment until it clicks into place. The compartment has a latch that keeps the battery

in place.

3)Fully charge the battery for 15-20 hours. When charging is complete, pull up on the latch to remove the battery pack. To install the charged battery into the handset, refer to "Installing the Handset Battery Pack," page 9.

In the event of a power failure, your spare battery pack can be used as a back-up power supply for the base unit.

10

Image 11
Contents Contents Introduction TIP TIP DESK/TABLETOP InstallationStandard wall plate mounting Wall InstallationDo not use an outlet controlled by a wall switch Direct wall mounting VAC wall outlet Page Installing the Handset Battery Pack Charging optional battery packs Charging the Battery PackInitial battery charging Low battery indicator Cleaning the Battery ContactsHandset earpiece volume Setting the PULSE/TONE SwitchAdjusting the Ringer Controls Handset ringer volumeTo remove the beltclip Installing the BeltclipTo attach the beltclip Automatic Digital Code Security Headset InstallationFlash and Call Waiting Making and Receiving CallsStoring a Phone Number in Memory Adjusting Volume During a CallDialing with Memory Features Using the memory location featuresTraveling OUT-OF-RANGE Chain DialingMute Tone RedialQuick Reference Chart TroubleshootingProblem Suggestion N E R a L Specifications