Uniden EXS9110 owner manual

Page 9

6) Plug one end of the long telephone cord into the TEL LINE jack on the back of the base, then plug the other end into a standard telephone jack.

7)Line up the mounting slots on the base with the mounting screws on the wall, then push in and down until the phone is firmly seated.

8)On the base unit, pull the handset retainer out of the slot and rotate it clockwise 180 degrees.

9)Flip the retainer from front to back, then slide it into the slot so that the lip of the retainer faces up and the oval is at the bottom of the retainer. This will hold the handset in place.

8

Image 9

Contents Contents Introduction TIP TIP DESK/TABLETOP InstallationStandard wall plate mounting Wall InstallationDo not use an outlet controlled by a wall switch Direct wall mounting VAC wall outlet Page Installing the Handset Battery Pack Charging the Battery Pack Initial battery chargingCharging optional battery packs Low battery indicator Cleaning the Battery ContactsAdjusting the Ringer Controls Setting the PULSE/TONE SwitchHandset ringer volume Handset earpiece volumeInstalling the Beltclip To attach the beltclipTo remove the beltclip Automatic Digital Code Security Headset InstallationFlash and Call Waiting Making and Receiving CallsDialing with Memory Features Adjusting Volume During a CallUsing the memory location features Storing a Phone Number in MemoryChain Dialing MuteTraveling OUT-OF-RANGE Tone RedialQuick Reference Chart TroubleshootingProblem Suggestion N E R a L Specifications