Uniden EXS9110 owner manual Headset Installation, Automatic Digital Code Security

Page 15

IMPORTANT

Use only the Uniden HS910 headset specifically designed for Spread Spectrum phones. You will hear a buzz or hum on other headsets.

IMPORTANT

Keep headset wire away from base antenna.

NOTE

If you are using an optional headset, you must still use the handset keypad for phone operations.

HEADSET INSTALLATION

Your phone may be used with an

 

optional headset, the Uniden HS 910.

 

To use this feature, simply insert the

headset

headset plug into the headset jack.

jack

Your headset is ready for

 

hands-free conversations.

 

AUTOMATIC DIGITAL CODE SECURITY

To prevent other parties from making unauthorized calls on your phone line, a digital code was added to the EXS9110. Your phone’s handset and base share this code, which is randomly set each time you place the handset in the charging cradle.

To reestablish communication between the handset and the base in the event of a power failure

1)Restore power to the base

2)Place the handset on the base. The status LED blinks to indicate that the digital security code is reset.

14

Image 15
Contents Contents Introduction TIP TIP DESK/TABLETOP InstallationStandard wall plate mounting Wall InstallationDo not use an outlet controlled by a wall switch Direct wall mounting VAC wall outlet Page Installing the Handset Battery Pack Charging the Battery Pack Initial battery chargingCharging optional battery packs Low battery indicator Cleaning the Battery ContactsHandset earpiece volume Setting the PULSE/TONE SwitchAdjusting the Ringer Controls Handset ringer volumeInstalling the Beltclip To attach the beltclipTo remove the beltclip Automatic Digital Code Security Headset InstallationFlash and Call Waiting Making and Receiving CallsStoring a Phone Number in Memory Adjusting Volume During a CallDialing with Memory Features Using the memory location featuresChain Dialing MuteTraveling OUT-OF-RANGE Tone RedialQuick Reference Chart TroubleshootingProblem Suggestion N E R a L Specifications