Uniden ELBT 595 owner manual Changing the Digital Security Code, Installing the Holster

Changing the Digital Security Code

The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. To change the digital security code:

1.De-register all the handsets you have (see page 93).

2.Re-register each handset by following the steps on page 14.

Installing the Holster

- Line up the groove on the back of the handset with the groove on the holster. The handset fits in the holster only one way.

- Slide the phone into the holster.

- Use the spring clip to attach the holster to your belt or pocket.

note

You must remove the holster to charge the handset.