Uniden ELBT 595 owner manual Liquid Damage, Case Action

Page 95

Liquid Damage

Moisture and liquid can damage your cordless phone. Follow the steps below if your phone gets wet:

Case

Action

 

 

If the handset or base is exposed to moisture or

 

liquid, but only the exterior plastic housing is

Wipe off the liquid, and use as normal.

affected.

 

 

 

If moisture or liquid has entered the plastic housing

Handset:

(i.e. liquid can be heard in the phone or liquid has

1) Remove the battery cover and leave it off for ventilation.

entered the handset battery compartment or vent

2) Disconnect the battery pack. Leave the battery cover off and the battery pack

openings on the base).

disconnected for at least 3 days.

 

3) Once the handset is completely dry, reconnect the battery pack and the battery

 

cover.

 

4) Recharge the handset's battery pack for 20 hours before using.

 

Base:

 

1) Disconnect the AC adapter from the base, cutting off electrical power.

 

2) Disconnect the telephone cord from the base.

 

3) Let dry for at least 3 days.

 

IMPORTANT: You must unplug the telephone line while recharging the battery

 

packs to avoid charge interruption.

 

CAUTION: DO NOT use a microwave oven to speed up the drying process. This will

 

cause permanent damage to the handset, base and the microwave oven.

 

After following these steps, if your cordless telephone does not work, please call

 

our Customer Service Hotline at 1-800-297-1023.

 

 

w w w . u n i d e n . c o m

Liquid Damage [ 9 4 ]

Liquid Damage

Image 95
Contents Series Owners Manual Contents Corporation under license FeaturesWelcome Corporation in the United States and/or other countriesTerminology AccessibilityControls & Functions 28 29 30 31 For maximum range Setting up the PhoneInstall the backup battery in the base Battery Backup FeatureFollow the steps below if you need to install a battery Install the rechargeable battery packCleaning the battery charging contacts Low battery alertConnect the base and charge the handset This phone can be mounted on any standard wall plate Mounting the Base Unit on a WallBackwards/Forwards Compatibility Expanding Your PhoneConnect the expansion handsets charger Select Register Handset , and press menu/select Register expansion handsets to the main baseChanging the Digital Security Code Installing the HolsterYour phone may be used with an optional headset Optional Headset InstallationStart menu and select Run Window, type d\autorun.exe Installing Unidens Cordless Telephone Customization Tool0GY%+& Using the InterfaceExample of the standby mode display Handset BaseIcon Description Display IconsHandset Standby modeTalk mode Soft Key FunctionPress menu/select Entering text Handset Main Menu Options Main Menu OptionsMobile Priority System Setup MenuSystem Setup Any Key Answer Handset only It easier to read. You might want to adjust the contrastLCD Contrast For Base Open to Answer Handset onlyCall Privacy Banner Display Handset onlyKey Touch Tone Unique ID Handset only Language For BaseDate and Time Global SetupArea Code Call WaitingRinger Tone Setting the Ringer OptionsDial Mode CPFQT/QDKNG NKEMGT Unique Ring Base Only Vibrate All Handset OnlyStoring Ringer Tones Call Vibrate Handset OnlyCustomize Your Own Distinctive Ringer Tones Handset Only Change Ringer Name Playing the RingerSelect a ringer to play, and press the Options soft key Or the Stop soft keyDeleting the Ringer Display Settings Handset OnlyWallpaper/Image Displays Handset Only LCD Contrast for the Handset Color Scheme Handset OnlyLanguage for the Handset Animation Type Handset onlySearch Device Using the Bluetooth FeatureRegistering a Mobile Phone to the Main Base Unit Again. appears Pair/Find MeDe-registering the Mobile Phone Editing the Mobile Name Select System Setup menu, and then selectViewing Bluetooth Properties of the Base Setting the Mobile Ring Tone Base OnlySelect on the base Auto ReconnectReconnect Mobile Registering the bluetooth headset Using Bluetooth Headset Handset OnlyViewing Paired Headsets Use the up/down key to select On/Off, and then press Viewing Bluetooth Properties of the HandsetTurning Bluetooth on or OFF HandsetYou will hear a confirmation tone, and Done! appears To reconnect the Bluetooth HeadsetDe-register the Bluetooth Headset From the Handset Using Your PhoneMaking Calls Using the Land Line Mobile without * beside it is out of range From the Handset SpeakerphoneSoft key Land or Mobile From the baseReceiving a call/AutoTalk set to Off From the base Switching to the Handset Speakerphone During a CallHanging Up Moving out of rangeCall Waiting Deluxe Call WaitingYou can easily join a call already in progress Placing a Call on HoldConferencing Joining a Conference CallConferencing two outside lines Land / Mobile From a second handsetConferencing with one outside line From the ELBT595 phone to your mobile phone Mobile Line TransferFrom your mobile phone to ELBT595 phone Then Yes. Press menu/select Redialing CallsDeleting Redial Records Adjusting the base speaker volume Adjusting Base Ringer and Speaker VolumesAdjusting the base ringer volume Ringer Adjust the handset ringer volume Using the Handset Volume Setting MenuAudio Tone MuteMute the Microphone Find Handset Tone Dialing Switch OverPrivacy Mode Scheduling a reminder Reminder Handset onlyEditing and deleting reminders Creating and Editing Phonebook Entries Using the PhonebookUnique Ring NumberSpeed Dial Unique Display Handset onlyGroup Storing and Editing Numbers from the Dial Operation Storing Caller ID or Redial Numbers in the PhonebookCopying phonebook entries to another handset or base Managing the PhonebookDeleting phonebook entries Changing the sorting order Checking the number of stored entriesOr talk/flash and or /flash on the base Using the Speed DialNaming phonebook groups Making Calls with the PhonebookUsing the Caller ID List Caller ID FeaturesCalling someone from the Caller ID list Deleting Caller ID numbersIf you want to see how many Caller ID numbers are stored Answering Machine FeaturesSecurity Code Setting Up the Answering MachineRecord Time Ring TimeCall Screen Message AlertLanguage Choosing a greeting From the base Setting Your Outgoing GreetingRecording a greeting From the base From the Handset Using the Answering MachineTurning On the Answering Machine From the base From the handset Reviewing MessagesScreening Calls Recording a phone conversationRecording a voice memo Do Not Disturb DNDRemote Operation Function Using DirectLink Mode Multi-Handset FeaturesRoom/Baby Monitor Using Room/Baby MonitorAnswering an intercom IntercomAnswering a transfer Transferring a CallBattery replacement and handling Power FailureAC Adapter Information Battery InformationGeneral Information Symptom Suggestion TroubleshootingTroubleshooting 9 Option, Find Me mode ELBT585/ELX500 Bluetooth TroubleshootingBase De-register the Handset System ResetReplacing the Base Setting Case Action Liquid DamagePrecautions One Year Limited Warranty Terminal Equipment Find handset IndexN D E Remote Operation Card Remote access away from homeTask Key At Uniden, well take care of you Register Online Today