Multi-Handset Features
The features in this section require a minimum of two handsets to operate. To add additional handsets to your system, see "Expanding Your Phone" on page 12.
Using DirectLink Mode
note
•If the party is out of
In DirectLink Mode, a pair of handsets can function as
the main base's ability to make or receive telephone calls. You must set both handsets to DirectLink Mode to make a directlink call. To enter DirectLink mode, Select Direct Link option in the main menu. And then
press the ENTER soft key. DirectLink Mode complete. appears when you enter
the DirectLink Mode.
To make a DirectLink call, press the DirectLink soft key. Select the handset you want to call. To cancel the call, Press end. To answer a DirectLink call, press talk/flash or on the side of the handset.
Press end when you want to hang up.
To exit DirectLink mode and be able to receive normal phone calls again, press the CANCEL soft key, and then press the OK soft key.
&KTGEV.KPM
5'.'%6
range, No Signal
appears in the display, and the operation will be canceled.
•While a pair of handsets are in DirectLink mode, they cannot be used to make or receive calls. Other handsets can still make and receive calls.
[ 8 3 ] | w w w . u n i d e n . c o m |